Vehicle recall defect – The Brakes Are Operated With VacuUM Assistance. The VacuUM Reservoir Tank May Develop Air Leaks From Rust Deterioration. The Rust Occurs Because The Position Of The Tank Does Not Allow Proper Drainage.
Vehicle recall defect – Because Of An Improper StaMPIng Procedure During Manufacture, Defects Exist Which Prevent Washers From Rotating On Spindle. If These Washers Are Not Replaced, An Excessive Clearance Will Result, Leading To Bearing Failure. In Extreme Cases This Can Result In Shearing Of The Front Stub Axle.
Vehicle recall defect – Because Of An Improper StaMPIng Procedure During Manufacture, Defects Exist Which Prevent Washers From Rotating On Spindle. If These Washers Are Not Replaced, An Excessive Clearance Will Result, Leading To Bearing Failure. In Extreme Cases This Can Result In Shearing Of The Front Stub Axle.
Vehicle recall defect – The Involved Vehicles Do Not Conform To Federal Motor Vehicle Safety Standard No. 110, “Tire SeleCTIon And Rims”. The Tires Installed On Specified Wheels Of This Vehicle Are Of Incorrect Size.
Vehicle recall defect – The Fuel Pump May Have Been Improperly Installed, Possibly Resulting In Misalignment Of The Pump.
Vehicle recall defect – Due To Installation Difficulties During Modification Of The Fuel Pump, The Pump May Have Been Misaligned. Certain Adverse Conditions Or High Loads Such As Trailer Towing, Motor Sports Events, Or Other Driving Modes Which Impose Abnormally High Loads On The Vehicles, Combined With Low Levels Of Fuel In The Tank, May Cause Lack Of Vehicle Power And Stalling.
Vehicle recall defect – The Involved Vehicles Do Not Conform To Federal Motor Vehicle Safety Standard No. 110, “Tire SeleCTIon And Rims”. The Tires Installed On Specified Wheels Of This Vehicle Are Of Incorrect Size.
Vehicle recall defect – An Incorrect Length Screw Was Used For Attaching The Emergency Exit Release Mechanism. This May Cause The Handle To Become Loose And, Possibly, Inoperative.
Vehicle recall defect – Information Supplied On The Certification Plate Is Insufficient And InAccurate.
Vehicle recall defect – The Present Exit Door Configuration May Allow A Passenger”S Foot, Arm, Or Shoulder, Or The Body Of A Child To Become Caught In The Door Pocket.