Vehicle recall defect – The Involved Cycles Were Produced With A Rear Brake Master Cylinder Push Rod Which Has Insufficient Contact Area With The Rear Brake Master Cylinder Piston. This Could Result In The Rod Penetrating The Piston During Extremely High Pedal Effort.
Vehicle recall defect – The Involved Cycles Were Produced With A Rear Brake Master Cylinder Push Rod Which Has Insufficient Contact Area With The Rear Brake Master Cylinder Piston. This Could Result In The Rod Penetrating The Piston During Extremely High Pedal Effort.
Vehicle recall defect – On The Involved Vehicles, One Or Both Of The Front Brake Caliper Bolts May Break. This Could Allow The Broken Portion Of The Bolt To Drift Into The Adjacent Rotating Wheel Spokes. Should Both Caliper Bolts Break, The Inner Caliper Half May Become Detached From The Motorcycle.
Vehicle recall defect – On The Involved Vehicles, One Or Both Of The Front Brake Caliper Bolts May Break. This Could Allow The Broken Portion Of The Bolt To Drift Into The Adjacent Rotating Wheel Spokes. Should Both Caliper Bolts Break, The Inner Caliper Half May Become Detached From The Motorcycle.
Vehicle recall defect – On The Involved Vehicles, One Or Both Of The Front Brake Caliper Bolts May Break. This Could Allow The Broken Portion Of The Bolt To Drift Into The Adjacent Rotating Wheel Spokes. Should Both Caliper Bolts Break, The Inner Caliper Half May Become Detached From The Motorcycle.
Vehicle recall defect – The Rear Brake Master Cylinder Plastic Piston Employs A Non-Specified Material Which May Allow Excessive Water Absorption. As A Result, The Plastic Piston Might Stick In The Master Cylinder Piston Bore And Cause Brake Drag.
Vehicle recall defect – Because The Rear Brake Pedal Is Made Of Aluminum Castings It Could Break At The Pedal Arm Or ClaMPIng Hole.
Vehicle recall defect – The Rear Brake Free Travel Adjusting Bolt And Nut Installed During Vehicle Assembly May Have Been Incorrectly Tightened. This Could Cause The Brake Pedal To Become Jammed During Brake Operation.
Vehicle recall defect – Certain Vehicles May Have Been Equipped With Front Brake Master Cylinders Which Have Fissures In The Cylinder Bodies. This Would Allow Brake Fluid Leakage Through The Fissured SeCTIon.
Vehicle recall defect – Because The Rear Brake Pedal Is Made Of Aluminum Castings It Could Break At The Pedal Arm Or ClaMPIng Hole.