Vehicle recall defect – The Adhesive Material Of The Two Piece Throttle Body Heater Migrates Into The Circulation Chamber Causing Build Up Of Impurities And RestriCTIon Of Flow Within The Chamber. This Condition And Water Vapors From The Crank That Freezes At Low Ambient Air Temperatures Prevents The Throttle Plate From Closing As The Driver Releases The Gas Pedal, Causing Loss Of Throttle Control.
Vehicle recall defect – Feed Fuel Hoses Can Harden And “Set” Over Time, Allowing A Seepage Of Fuel At The ConneCTIon Between The Hose And The Engine Fitting. The Clamp Used To Hold The Hose To The Fitting Is Unable To Compensate For The Hardening Of The Feed Fuel Hose.
Vehicle recall defect – The Adhesive Material Of The Two Piece Throttle Body Heater Migrates Into The Circulation Chamber Causing Build Up Of Impurities And RestriCTIon Of Flow Within The Chamber. This Condition And Water Vapors From The Crank That Freezes At Low Ambient Air Temperatures Prevents The Throttle Plate From Closing As The Driver Releases The Gas Pedal, Causing Loss Of Throttle Control.
Vehicle recall defect – Feed Fuel Hoses Can Harden And “Set” Over Time, Allowing A Seepage Of Fuel At The ConneCTIon Between The Hose And The Engine Fitting. The Clamp Used To Hold The Hose To The Fitting Is Unable To Compensate For The Hardening Of The Feed Fuel Hose.
Vehicle recall defect – The Adhesive Material Of The Two Piece Throttle Body Heater Migrates Into The Circulation Chamber Causing Build Up Of Impurities And RestriCTIon Of Flow Within The Chamber. This Condition And Water Vapors From The Crank That Freezes At Low Ambient Air Temperatures Prevents The Throttle Plate From Closing As The Driver Releases The Gas Pedal, Causing Loss Of Throttle Control.
Vehicle recall defect – The MalfunCTIon Or Failure Of A Coolant System Component Results In Significantly Increased Coolant Temperature And A Resulting Increase In System Pressure.
Vehicle recall defect – The Crankcase Ventilation System, Vented Into The Intake Tract Of The Engine At The Bellows Boot Ahead Of The Throttle Housing, Allows Warm Water Vapor From The Crankcase Vent To Condense And Freeze In The Colder Bellows Boot When The Ambient Air Temperature Is 15 Degrees Fahrenheit Or Less. The Build Up Of Ice Can Dislodge And Move Into The Throttle Housing, Preventing The Throttle Plate From Fully Closing When The Driver Releases The Gas Pedal.