3200

IC Bus 3200 (2011) – 14V042000

Vehicle recall defect – Navistar Inc. (Navistar) Is Recalling Certain Model Year 2010-2011 IC Bus 3200, Model Year 2012 And 2014 IC Bus Ce And Model Year 2011-2013 IC Bus Hc Transit Buses And Model Year 2008-2013 International 4300 And Model Year 2013 International Workstar Commercial Trucks Equipped With Eaton Hybrid Automated Transmissions. The Software Controlling The Affected Transmissions May Improperly Raise The Vehicle’S Engine Speed During Downshifts Without The Driver’S Input.


IC Bus 3200 (2010) – 14V042000

Vehicle recall defect – Navistar Inc. (Navistar) Is Recalling Certain Model Year 2010-2011 IC Bus 3200, Model Year 2012 And 2014 IC Bus Ce And Model Year 2011-2013 IC Bus Hc Transit Buses And Model Year 2008-2013 International 4300 And Model Year 2013 International Workstar Commercial Trucks Equipped With Eaton Hybrid Automated Transmissions. The Software Controlling The Affected Transmissions May Improperly Raise The Vehicle’S Engine Speed During Downshifts Without The Driver’S Input.


International 3200 (2003) – 03V062000

Vehicle recall defect – On Certain School And Transit Buses Built With Bosch Zero Offset Pin Slide (Zops) Hydraulic Disc Brakes, The Zops Hydraulic Disc Brakes May Experience Calipers Sticking In The Applied Position, Which Can Result In Excessive Or Abnormal Heat Generation At One Or More Of The Brakes.


International 3200 (2003) – 03V024000

Vehicle recall defect – Certain School Buses And Heavy Duty Trucks Built With Hydraulic Brakes And An Air Powered Parking Brake (Brake Code 04Gas) Fail To Comply With The Requirements Of Federal Motor Vehicle Safety Standard No. 105, “Hydraulic And Electric Brake Systems.” The Hydraulic Brake Monitor Module Was Not Installed On Certain Vehicles.


International 3200 (2003) – 02V260000

Vehicle recall defect – On Certain Medium And Heavy Duty Trucks Built With Driveline Parking Brake Codes 04Gar, The Parking Brake Assembly May Not Hold The Vehicle In Position When Set. Factors Contributing To This Possibility Are As Follows: (1) Cracked Or Broken Cams; (2) Loose Or Broken Anchor Bolts; (3) Initial Shoe Diameter Not Set Properly During Assembly, Which Can Lead To Progressive Component Damage; (4) Bent Adjuster Levers That Cannot FunCTIon; Or (5) Automatic Adjuster Cables That Are Disconnected.


International 3200 (2003) – 02V204000

Vehicle recall defect – On Certain School Buses And Heavy Duty Trucks Built With International Vt365 Engines And Manufactured At International Diesel Of Alabama. The Injector Driver Modules (Idm) Built For The Vt365 Engines Could Have Missing Vibration DaMPIng/Retention Shells And A Missing Hot-Melt Process On The Dc/Dc Boards.


International 3200 (2002) – 08V353000

Vehicle recall defect – Navistar Is Recalling 24,975 My 2003 Through 2008 Ic Be, Ce, Hc, And Re School And Commercial Buses And 2002 Through 2008 International 3200 And 3300 Model Buses Manufactured Between September 21, 2001 Through December 14, 2007, Equipped With International Vt365 Engines. These Vehicles May Exhibit Engine Hard Start, No Start, Or Stall Conditions Due To Possibly Damaged Terminals In The Fuse Holder Connector Of The Injector Drive Module (Idm) Clean Battery Power Circuits. The Terminals May Have Been Damaged During Electrical Continuity Testing In The Manufacturing Process.


International 3200 (2002) – 03V414000

Vehicle recall defect – On Certain Trucks Equipped With V8 Engines And Air Brakes Or Air Operated Park Brakes, A Stand-Off Bracket Was Not Installed. The Bracket Supports The Copper Air Compressor Discharge Tube. Normal Vehicle And Engine Vibration Can Cause The Unsupported Copper Tube To Fail At Or Near The Air Compressor ConneCTIon.


International 3200 (2002) – 03V062000

Vehicle recall defect – On Certain School And Transit Buses Built With Bosch Zero Offset Pin Slide (Zops) Hydraulic Disc Brakes, The Zops Hydraulic Disc Brakes May Experience Calipers Sticking In The Applied Position, Which Can Result In Excessive Or Abnormal Heat Generation At One Or More Of The Brakes.


International 3200 (2002) – 02V260000

Vehicle recall defect – On Certain Medium And Heavy Duty Trucks Built With Driveline Parking Brake Codes 04Gar, The Parking Brake Assembly May Not Hold The Vehicle In Position When Set. Factors Contributing To This Possibility Are As Follows: (1) Cracked Or Broken Cams; (2) Loose Or Broken Anchor Bolts; (3) Initial Shoe Diameter Not Set Properly During Assembly, Which Can Lead To Progressive Component Damage; (4) Bent Adjuster Levers That Cannot FunCTIon; Or (5) Automatic Adjuster Cables That Are Disconnected.