Vehicle recall defect – The Wiring From The Electronic Control Unit Was Connected To The Wrong Wheel Sensor Or To The Wrong Brake Modulator Valve. It Is Possible That Either Or Both Wiring May Have Occurred At Either The Front Or Rear Axle Or Both Axles.
Vehicle recall defect – The Wiring From The Electronic Control Unit Was Connected To The Wrong Wheel Sensor Or To The Wrong Brake Modulator Valve. It Is Possible That Either Or Both Wiring May Have Occurred At Either The Front Or Rear Axle Or Both Axles.
Vehicle recall defect – The Wiring From The Electronic Control Unit Was Connected To The Wrong Wheel Sensor Or To The Wrong Brake Modulator Valve. It Is Possible That Either Or Both Wiring May Have Occurred At Either The Front Or Rear Axle Or Both Axles.
Vehicle recall defect – The Hand Throttle Cable May Be Mis-Aligned With The Accelerator Rod Causing The Hand Throttle Cable To “Saw” Into The Accelerator Rod. This Can Cause The Accelerator And Hand Throttle Cable To Bind In A Partial Or Full Throttle Position.
Vehicle recall defect – The Wiring From The Electronic Control Unit Was Connected To The Wrong Wheel Sensor Or To The Wrong Brake Modulator Valve. It Is Possible That Either Or Both Wiring May Have Occurred At Either The Front Or Rear Axle Or Both Axles.
Vehicle recall defect – The Hand Throttle Cable May Be Mis-Aligned With The Accelerator Rod Causing The Hand Throttle Cable To “Saw” Into The Accelerator Rod. This Can Cause The Accelerator And Hand Throttle Cable To Bind In A Partial Or Full Throttle Position.
Vehicle recall defect – The Wiring From The Electronic Control Unit Was Connected To The Wrong Wheel Sensor Or To The Wrong Brake Modulator Valve. It Is Possible That Either Or Both Wiring May Have Occurred At Either The Front Or Rear Axle Or Both Axles.
Vehicle recall defect – The Hand Throttle Cable May Be Mis-Aligned With The Accelerator Rod Causing The Hand Throttle Cable To “Saw” Into The Accelerator Rod. This Can Cause The Accelerator And Hand Throttle Cable To Bind In A Partial Or Full Throttle Position.
Vehicle recall defect – The Hand Throttle Cable May Be Mis-Aligned With The Accelerator Rod Causing The Hand Throttle Cable To “Saw” Into The Accelerator Rod. This Can Cause The Accelerator And Hand Throttle Cable To Bind In A Partial Or Full Throttle Position.