810

Cencorp 810 (1994) – 99V006000

Vehicle recall defect – Vehicle Description: Trailers Manufactured By Various Builders For Straightline Manufacturing. The Axles And Axle Components Can Bend And Even Break On Some Units Allowing The Axle To Strike The Frame Causing Damage To The Axle And Axle Assemblies.


Cencorp 810 (1993) – 99V006000

Vehicle recall defect – Vehicle Description: Trailers Manufactured By Various Builders For Straightline Manufacturing. The Axles And Axle Components Can Bend And Even Break On Some Units Allowing The Axle To Strike The Frame Causing Damage To The Axle And Axle Assemblies.


Cencorp 810 (1996) – 99V006000

Vehicle recall defect – Vehicle Description: Trailers Manufactured By Various Builders For Straightline Manufacturing. The Axles And Axle Components Can Bend And Even Break On Some Units Allowing The Axle To Strike The Frame Causing Damage To The Axle And Axle Assemblies.


Cencorp 810 (1995) – 99V006000

Vehicle recall defect – Vehicle Description: Trailers Manufactured By Various Builders For Straightline Manufacturing. The Axles And Axle Components Can Bend And Even Break On Some Units Allowing The Axle To Strike The Frame Causing Damage To The Axle And Axle Assemblies.


Eco 810 – 07E108000

Vehicle recall defect – Certain Eco And Echelon Branded Aluminum Alloy Wheels, Sizes 20″X9″, 22″X9.5″, 24″X10″, And 26″X10″. Due To Inferior Manufacturing Process, The Wheel Can Break In Half.


Nissan 810 (1977) – 79V242000

Vehicle recall defect – Moisture And Blow Of Mist Present In The Positive Crankcase Ventilation System May, Under Conditions Of Sub-Zero Temperatures, Accumulate In The Air Regulator, Causing Prolonged Engine Idle, If Owner Fails To Fully Warm Engine Before Driving. The Pcv System Can Also Cause A Gumming In The Throttle Shaft Which Will Impair The Smooth Open/Close Operation Of The Throttle.


Nissan 810 (1977) – 78V088000

Vehicle recall defect – There Is A Possibility Of Premature Hose Deterioration Due To High Fuel Oxidation Levels Which Would Allow Fuel Seepage And Fumes To Enter The Vehicle.


Nissan 810 (1976) – 79V242000

Vehicle recall defect – Moisture And Blow Of Mist Present In The Positive Crankcase Ventilation System May, Under Conditions Of Sub-Zero Temperatures, Accumulate In The Air Regulator, Causing Prolonged Engine Idle, If Owner Fails To Fully Warm Engine Before Driving. The Pcv System Can Also Cause A Gumming In The Throttle Shaft Which Will Impair The Smooth Open/Close Operation Of The Throttle.


Nissan 810 (1975) – 79V242000

Vehicle recall defect – Moisture And Blow Of Mist Present In The Positive Crankcase Ventilation System May, Under Conditions Of Sub-Zero Temperatures, Accumulate In The Air Regulator, Causing Prolonged Engine Idle, If Owner Fails To Fully Warm Engine Before Driving. The Pcv System Can Also Cause A Gumming In The Throttle Shaft Which Will Impair The Smooth Open/Close Operation Of The Throttle.


Nissan 810 (1979) – 79V242000

Vehicle recall defect – Moisture And Blow Of Mist Present In The Positive Crankcase Ventilation System May, Under Conditions Of Sub-Zero Temperatures, Accumulate In The Air Regulator, Causing Prolonged Engine Idle, If Owner Fails To Fully Warm Engine Before Driving. The Pcv System Can Also Cause A Gumming In The Throttle Shaft Which Will Impair The Smooth Open/Close Operation Of The Throttle.