International 8100 (1990) – 92V175000
Vehicle recall defect – The Fuel Cap May Not Lock Or Seal Properly.
Vehicle recall defect – The Fuel Cap May Not Lock Or Seal Properly.
Vehicle recall defect – Vehicle Description: Heavy Duty Trucks Equipped With Air Brake Haldex Automatic Slack Adjusters, Long Stroke Brake Chambers, And Dana Brakes. The Automatic Slack Adjuster Anchor Brackets Can Fail Due To Fatigue Fracture And Completely Separate, Causing The Slack Adjusters To FunCTIon As Manual Slack Adjusters.
Vehicle recall defect – These Vehicles Were Built With An Improperly Plumbed Brake System Which Affects The Braking On The Rear Axle When Running Either Bobtail Or Pulling A Trailer.
Vehicle recall defect – Vehicle Description: Heavy Duty Trucks Equipped With Air Brake Haldex Automatic Slack Adjusters, Long Stroke Brake Chambers, And Dana Brakes. The Automatic Slack Adjuster Anchor Brackets Can Fail Due To Fatigue Fracture And Completely Separate, Causing The Slack Adjusters To FunCTIon As Manual Slack Adjusters.
Vehicle recall defect – These Vehicles Were Built With An Improperly Plumbed Brake System Which Affects The Braking On The Rear Axle When Running Either Bobtail Or Pulling A Trailer.
Vehicle recall defect – During Assembly, The Tie Rod End Nuts Were Not Properly Torqued. Extremely Low Torque Can Allow Movement Beween The Ball StUD And The Tie Rod Arm Causing Damage.
Vehicle recall defect – The Base Of The Electronic Accelerator Pedal Is Made Of Die Cast Aluminum. The Base Mounts Directly To The Cab Firewall. The Cab Firewall Is Not Rigid Enough Or Flat Enough At The Mounting Surface, Causing Stress On The Accelerator Base That Will Cause The Mounting Pads On The Base Of The Pedal Assembly To Fail And Totally Separate From The Firewall.
Vehicle recall defect – Four Compression Backplate Retaining Fasteners On The Turbo-Charger Were Torqued Only Hand Tight. This Allows The Fasteners To Loosen, And Causes Oil To Leak Into The Compressor Air Side Of The Turbo-Charger Which, When Coupled With The Heat Precipitated By The Compressor And The Mixing Action Of The Compressor Wheel, Can Result In An Air/Oil Mixture That Fuels The Engine.
Vehicle recall defect – The Base Of The Electronic Accelerator Pedal Is Made Of Die Cast Aluminum. The Base Mounts Directly To The Cab Firewall. The Cab Firewall Is Not Rigid Enough Or Flat Enough At The Mounting Surface, Causing Stress On The Accelerator Base That Will Cause The Mounting Pads On The Base Of The Pedal Assembly To Fail And Totally Separate From The Firewall.
Vehicle recall defect – Four Compression Backplate Retaining Fasteners On The Turbo-Charger Were Torqued Only Hand Tight. This Allows The Fasteners To Loosen, And Causes Oil To Leak Into The Compressor Air Side Of The Turbo-Charger Which, When Coupled With The Heat Precipitated By The Compressor And The Mixing Action Of The Compressor Wheel, Can Result In An Air/Oil Mixture That Fuels The Engine.