Vehicle recall defect – On Certain Travel Trailers Equipped With Samsung Microwave Ovens, These Ovens Were Produced With A DefeCTIve Panel. An Electrical Short Can Occur Between Circuit Patterns On The Membrane Panel, Especially Overlapped By A “Jumper” Or Jump Wire. This May Cause The Oven To Activate Without Pressing Any Key Pads.
Vehicle recall defect – On Certain Travel Trailers Equipped With Samsung Microwave Ovens, These Ovens Were Produced With A DefeCTIve Panel. An Electrical Short Can Occur Between Circuit Patterns On The Membrane Panel, Especially Overlapped By A “Jumper” Or Jump Wire. This May Cause The Oven To Activate Without Pressing Any Key Pads.
Vehicle recall defect – On Certain Travel Trailers Equipped With Samsung Microwave Ovens, These Ovens Were Produced With A DefeCTIve Panel. An Electrical Short Can Occur Between Circuit Patterns On The Membrane Panel, Especially Overlapped By A “Jumper” Or Jump Wire. This May Cause The Oven To Activate Without Pressing Any Key Pads.
Vehicle recall defect – On Certain Travel Trailers Equipped With Samsung Microwave Ovens, These Ovens Were Produced With A DefeCTIve Panel. An Electrical Short Can Occur Between Circuit Patterns On The Membrane Panel, Especially Overlapped By A “Jumper” Or Jump Wire. This May Cause The Oven To Activate Without Pressing Any Key Pads.
Vehicle recall defect – The Clearance Lamps Flush Mounted In The Cab Do Not Meet The Photometric Requirements Of Fmvss No. 108, “Lamps, RefleCTIve Devices, And Associated Equipment,” And The Required Left And Right Side Marker/Reflex Reflectors Are Missing.
Vehicle recall defect – The Clearance Lamps Flush Mounted In The Cab Do Not Meet The Photometric Requirements Of Fmvss No. 108, “Lamps, RefleCTIve Devices, And Associated Equipment,” And The Required Left And Right Side Marker/Reflex Reflectors Are Missing.
Vehicle recall defect – The Clearance Lamps Flush Mounted In The Cab Do Not Meet The Photometric Requirements Of Fmvss No. 108, “Lamps, RefleCTIve Devices, And Associated Equipment,” And The Required Left And Right Side Marker/Reflex Reflectors Are Missing.
Vehicle recall defect – The Clearance Lamps Flush Mounted In The Cab Do Not Meet The Photometric Requirements Of Fmvss No. 108, “Lamps, RefleCTIve Devices, And Associated Equipment,” And The Required Left And Right Side Marker/Reflex Reflectors Are Missing.
Vehicle recall defect – The Clearance Lamps Flush Mounted In The Cab Do Not Meet The Photometric Requirements Of Fmvss No. 108, “Lamps, RefleCTIve Devices, And Associated Equipment,” And The Required Left And Right Side Marker/Reflex Reflectors Are Missing.
Vehicle recall defect – The Equalizing Beam Shaft Of The Tandem Axle Suspension Were Manufactured From As-Rolled Sae4140 Steel Rather Than The Specified Annealed Sae4140. These Shafts Can Fracture Inside The Beam At The Toe Of The Weld.