alcoa

Alcoa Aluminum Wheel – 15E051000

Vehicle recall defect – Alcoa Inc. (Alcoa) Is Recalling Certain 22.5″ X 8.25″ Aluminum Wheels, Model Number 88367X, Manufactured From April 27, 2015, Through May 19, 2015. Due To A Forging Problem, The Wheel Rim Flange SeCTIon May Separate During The Initial Tire Mounting And Inflation Process.


Alcoa Alcoa – 99E013000

Vehicle recall defect – Equipment Description: Forged Aluminum Bus Wheels, Size 22.5″ X 8.25″, Part No. 883613, And Shipped To Oems. These Wheels Are Below Design Specifications And Internal Requirements Which Can Cause The Unsupported Open End Of The Wheel To Deform, Resulting In Sudden Loss Of Air.


Alcoa Alcoa – 86E028000

Vehicle recall defect – The Wheels Contain Pilot Bores Which Are Below The MinimUM Specified Diameter. Consequence Of Defect: If The Above Condition Exists, It Could Interfere With The Proper Mounting And Potentially Cause StUD Breakage, Loss Of Wheel And May Result In Loss Of Vehicle Control Which Could Lead To An Accident.


Alcoa Alcoa – 84E017000

Vehicle recall defect – Some Two-Piece Wheel Cap Nuts Have A Faulty Washer SeCTIon That Cannot Be Detected By The Naked Eye. This Defect May Lead To Cracking Of The Washer SeCTIon Which Can Cause Nut To Loosen. Eventually, The Nuts Could Fall Off And The Wheel Would Become Detached From The Vehicle.


Alcoa Alcoa – 77E025000

Vehicle recall defect – The Involved Wheels Fail To Conform To Federal Motor Vehicle Safety Standard No. 120, “Tire SeleCTIon And Rims For Motor Vehicles Other Than Passenger Cars”, Due To Improper Rim Size Marking.


Alcoa Classic (1996) – 98E039000

Vehicle recall defect – Equipment Description: Aftermarket Aluminum Light Truck Wheels, 16″X6″, Used With Dual Rear Wheel Axle Applications. Fatigue Cracks Can Occur At Multiple Locations In The Outboard Bear Seat Area, Allowing Air To Slowly Leak Out Of The Tire. If The User Ignores The Problem, The Cracks Can Continue Around The Circumference Of The Wheel, Causing The Face Of The Wheel To Separate From The Remaining Part Of The Wheel.


Alcoa Classic (1995) – 98E039000

Vehicle recall defect – Equipment Description: Aftermarket Aluminum Light Truck Wheels, 16″X6″, Used With Dual Rear Wheel Axle Applications. Fatigue Cracks Can Occur At Multiple Locations In The Outboard Bear Seat Area, Allowing Air To Slowly Leak Out Of The Tire. If The User Ignores The Problem, The Cracks Can Continue Around The Circumference Of The Wheel, Causing The Face Of The Wheel To Separate From The Remaining Part Of The Wheel.


Alcoa Classic (1994) – 98E039000

Vehicle recall defect – Equipment Description: Aftermarket Aluminum Light Truck Wheels, 16″X6″, Used With Dual Rear Wheel Axle Applications. Fatigue Cracks Can Occur At Multiple Locations In The Outboard Bear Seat Area, Allowing Air To Slowly Leak Out Of The Tire. If The User Ignores The Problem, The Cracks Can Continue Around The Circumference Of The Wheel, Causing The Face Of The Wheel To Separate From The Remaining Part Of The Wheel.


Alcoa Classic (1993) – 98E039000

Vehicle recall defect – Equipment Description: Aftermarket Aluminum Light Truck Wheels, 16″X6″, Used With Dual Rear Wheel Axle Applications. Fatigue Cracks Can Occur At Multiple Locations In The Outboard Bear Seat Area, Allowing Air To Slowly Leak Out Of The Tire. If The User Ignores The Problem, The Cracks Can Continue Around The Circumference Of The Wheel, Causing The Face Of The Wheel To Separate From The Remaining Part Of The Wheel.


Alcoa Wheel – 92E010000

Vehicle recall defect – There Is A Circumferential Linear Discontinuity, Which Appears As A Crack, At The InterseCTIon Of The Disc And The Rim On The Shallow Side Of Some Of The Wheels.