brake drum

Dexter Brake DrUM – 01E005000

Vehicle recall defect – Equipment Description: Hi-Spec Wheels, Part No. 356655, Used In Combination With Dexter Axle (6) Bolt Brake Drums Manufactured Between February And October 2000. A Design Change With The Brake DrUM Rendered Them Incompatible With Certain Cast Aluminum Wheels Produced By Hi-Spec Wheel & Tire Company. Brake Drums Used With These Wheels Do Not Provide Sufficient Mounting Surface Area For Support Of These Wheels.


Rockwell Brake DrUM – 95E002000

Vehicle recall defect – The Machining Performed On The Brake Drums Will Not Permit The DrUM To Seat Fully Against The Hub Face. The Reduced Brake DrUM And Hub Contact Area Will Abrade And Fret Allowing The Wheel Mounting Joint To Loosen.


Rockwell Brake DrUM – 90E029000

Vehicle recall defect – Hub Mounting Face Diameter Of DrUM May Be Improperly Machined Causing A Line Contact Interference Of The Hub And DrUM Assembly, Loosening Of The Wheel Nut And Wheel StUD Fracture.


Webb Brake DrUM – 98E015000

Vehicle recall defect – Equipment Description: Steering Axle Brake Drums, Part Number 61958B, Used In An Axle Assembly Combination Supplied Solely To Blue Bird Body Company. The Brake DrUM Is Oversized In The Area Above The Mounting Flange And Prevents The Disc Wheel From Mounting Flat Against The Brake Drum.


Webb Brake DrUM – 00E070000

Vehicle recall defect – Equipment Description: Hubs For Truck Trailer Disc Wheels With Direct-Machined Abs Of Part Number 2023A Manufactured Between April 14 And June 7, 2000. The Abs Teeth Are Machined Into The Inner Face Of The Hub Bore, And The Teeth Are Machined Off Center From The Center Of The Hub. The Speed Sensor Of The Abs System Reads The Tooth Pattern And Sends Erroneous Signals To The Abs Control Unit.