Vehicle recall defect – On Certain Travel Trailers Equipped With Samsung Microwave Ovens, These Ovens Were Produced With A DefeCTIve Panel. An Electrical Short Can Occur Between Circuit Patterns On The Membrane Panel, Especially Overlapped By A “Jumper” Or Jump Wire. This May Cause The Oven To Activate Without Pressing Any Key Pads.
Vehicle recall defect – On Certain Travel Trailers Equipped With Samsung Microwave Ovens, These Ovens Were Produced With A DefeCTIve Panel. An Electrical Short Can Occur Between Circuit Patterns On The Membrane Panel, Especially Overlapped By A “Jumper” Or Jump Wire. This May Cause The Oven To Activate Without Pressing Any Key Pads.
Vehicle recall defect – Vehicle Description: Travel Trailers. Wooden Boards Were Mounted Between The Axle Brackets And The Frame Of These Travel Trailers. The Boards Could Deteriorate And/Or Compress Sufficiently To Allow The Metal Bracket Of The Axle Mount To Press Downward Against The Bracket Side Mounting Bolts.
Vehicle recall defect – On Certain Travel Trailers Equipped With Samsung Microwave Ovens, These Ovens Were Produced With A DefeCTIve Panel. An Electrical Short Can Occur Between Circuit Patterns On The Membrane Panel, Especially Overlapped By A “Jumper” Or Jump Wire. This May Cause The Oven To Activate Without Pressing Any Key Pads.
Vehicle recall defect – Vehicle Description: Passenger Vehicles. The Lower Control Arm Ball Joint Can Separate Due To Loss Of Lubrication.
Vehicle recall defect – On Certain Passenger Vehicles, The Floor Shifter Ignition-Park Interlock May Fail And Allow The Shifter To Be Moved Out Of The Park Position With The Key Removed. An Inoperative Interlock May Also Allow The Key To Be Removed When The Shifter Has Not Been Placed In The Park Position.
Vehicle recall defect – Vehicle Description: Passenger Vehicles. The Secondary Hood Latch Spring Can Disengage From Its Retention Hole If The Hood Is Slammed Shut.
Vehicle recall defect – Vehicle Description: Passenger Vehicles. The Lower Control Arm Ball Joint Can Separate Due To Loss Of Lubrication.
Vehicle recall defect – Federal-Mogul Is Recalling Certain Replacement Control Arm Assemblies, Part Numbers K7425, 10945, Fa4510X, K7427, 10946, And Fa4611X, Sold For Use On Various Passenger Vehicles Listed Above. The Ball Joint On The Control Arm Assembly Can Fail Causing The Ball StUD To Wear Through The Control Arm Housing Resulting In Noise And/Or Separation Of The Ball StUD From The Housing.
Vehicle recall defect – Qualis Automotive Is Recalling Certain Aftermarket Ball Joints Sold For Use On Certain Passenger Vehicles. The Socket May Have Been Excessively Hardened Which Could Cause It To Crack Near The Retaining Ring Groove Allowing The Ball StUD To Separate Under Impact Load. The Subject Ball Joints Were Sold As Four Part Numbers, D10945, D10946, G10945, And G10946. The Affected Control Arms, D10945 And D10946, Are Stamped With The Following Dates On The Ball Joints: 134308, 135708, 100109, 102709, 104109, 105509, 107609, 108909, 110309, 113209, And 116609. The G10945 And G10946 Are The Same Part As The D10945 And D10946 RespeCTIvely. They Are Labeled Differently Depending On The Aftermarket Customer.