Vehicle recall defect – Nylon Fuel Lines On The Fuel Return Side Of The Fuel Pressure Regulator Assembly May Crack. Consequence Of Defect: Fuel Line Could Leak And, If An Ignition Source Is Present, Create The Potential For A Fire.
Vehicle recall defect – The Electronic Engine Control Wiring Harness Insulation May Be Damaged Due To Copper Spikes Produced During The Welding Of Its Wires. This Creates A Potential For A Short Circuit Between The Wires Which Energize The Fuel Pump, Causing Some Fuel Injectors To Open, Discharging Fuel Into The Engine. Consequence Of Defect: Fuel Discharged Into The Engine Would Eventually Leak Through The Exhaust System To The Ground. This Could Result In A Fire If A Source Of Ignition Is Present.
Vehicle recall defect – Certain Federal-Mogul Aftermarket Fuel Pumps Sold Under The Brand Names Of Carter, Accuflow, Napa, Truflow, Parts Depo, And Parts Master, Shipped Between August 2006 And July 2007 For Use On The Vehicles Listed Above. The Fuel Pump DiaphraGM In Certain ProduCTIon Runs May Have Been Improperly Installed Or Inadequately Tested Which May Cause The Fuel Pump To Leak.
Vehicle recall defect – Components In The Locking Hubs Were Improperly Heat-Treated And May Crack Or Fracture Upon Engagement Of The Front Drive Axles. The Broken Component On The Left Front Wheel May Become Jammed Against The Nut.
Vehicle recall defect – The Bolts That Attach The D-Shaped Ring For The Shoulder Belt Are Inadequately Supported By The Material In Which They Are Mounted. The Attachment Does Not Comply With The Requirements Of Federal Motor Vehicle Safety Standard No. 210, “Seat Belt Assembly Anchorages”.
Vehicle recall defect – Certain Federal-Mogul Aftermarket Fuel Pumps Sold Under The Brand Names Of Carter, Accuflow, Napa, Truflow, Parts Depo, And Parts Master, Shipped Between August 2006 And July 2007 For Use On The Vehicles Listed Above. The Fuel Pump DiaphraGM In Certain ProduCTIon Runs May Have Been Improperly Installed Or Inadequately Tested Which May Cause The Fuel Pump To Leak.
Vehicle recall defect – Equipment Description: Aftermarket Brake Rotors For Use On Certain Ford And Mazda Trucks. Cracked Castings Caused Cracks To Appear On The Outer Diameter Of The Rotor Hat Or Around The StUD Hole.
Vehicle recall defect – When The Automatic Transmission Shift Lever Is Placed In The Park Position, The Park Pawl Does Not Always Abut Or Engage The Park Gear.
Vehicle recall defect – Front Wheel Bearing Adjusting Nut Retaining Keys May Be Missing From Front Axle Assemblies, Allowing The Nut To Loosen.
Vehicle recall defect – Spring Lock Fuel Line Coupling May Not Be Properly Engaged.