caballero

GMC Caballero (1979) – 07E088000

Vehicle recall defect – Certain Honeywell Fram Racing Brand Hp4 And Hp8 Oil Filters That Were Manufactured From May 25, 2006, Through September 14, 2007, And Sold For Use As Replacement Equipment For Vehicles List Above. The Affected Filters Are Marked With A Date Code A61451 Through A72571 Sequentially. The Date Code And Part Number Appear On The Filter Housing. Fram Racing Hp4 And Hp8 Oil Filters Not Bearing A Date Code In This Range Are Not Affected By This Recall. The Gasket Of The Oil Filter Becomes More Pliable Under High Temperatures And Pressures.


GMC Caballero (1978) – 85V048000

Vehicle recall defect – Excessive Enlargement Of The Wheel Cylinder Pilot Hole In The Rear Brake Backing Plate Could Allow The Wheel Cylinder To Rotate And Cause Loss Of Brake Fluid. Consequence Of Defect: A Loss Of Brake Fluid Leads To Loss Of Rear Brake Action, Creating The Potential For An Accident. Front Brakes Would Remain Operational.


GMC Caballero (1978) – 84V149000

Vehicle recall defect – Rear Axle Assembly May Have Axles That Were Improperly Manufactured. This Condition May Result In Separation Of The Axle Shaft And Wheel Assembly From The Vehicle.


GMC Caballero (1978) – 81V025000

Vehicle recall defect – The Bolts That Attach The Lower Rear Control Arm To The Frame May Fracture. The Rear Control Arm Supports And Positions The Rear Axle. Fracture Of The Bolts Would Allow The Control Arm To Drop Free.


GMC Caballero (1978) – 79V175000

Vehicle recall defect – Under Certain Driving Conditions, These Vehicles Can Experience Temperatures In The Front Wheel Outer Bearing Area Which Can Affect The Wheel Bearing Grease. This Can Result In Inadequate Lubrication Of The Bearing. This Condition May Be Further Aggravated By Improper Adjustment Of The Front Wheel Spindle Nut.


GMC Caballero (1978) – 07E088000

Vehicle recall defect – Certain Honeywell Fram Racing Brand Hp4 And Hp8 Oil Filters That Were Manufactured From May 25, 2006, Through September 14, 2007, And Sold For Use As Replacement Equipment For Vehicles List Above. The Affected Filters Are Marked With A Date Code A61451 Through A72571 Sequentially. The Date Code And Part Number Appear On The Filter Housing. Fram Racing Hp4 And Hp8 Oil Filters Not Bearing A Date Code In This Range Are Not Affected By This Recall. The Gasket Of The Oil Filter Becomes More Pliable Under High Temperatures And Pressures.


GMC Caballero (1987) – 06E043000

Vehicle recall defect – Certain Replacement Fuel Filters, Fram Brand Name P/N G3727, With Date Codes X52911 Through X60801 Sequentially Or X600141 And A Mexico Country Or Origin Marking On The Fuel Filter Housing Manufactured From October 18, 2005, Through March 21, 2006, Sold For Use On The Vehicles Listed Above And On Certain School Buses. (To See The School Bus Engine Sizes, Click On “Document Search” And Then “Bus Applications”). The Connector On The Fuel Filter Was Not Manufactured To Honeywell’S Specification. As A Result, The O-Ring May Not Seat Correctly On The Fuel Line.


GMC Caballero (1979) – 85V048000

Vehicle recall defect – Excessive Enlargement Of The Wheel Cylinder Pilot Hole In The Rear Brake Backing Plate Could Allow The Wheel Cylinder To Rotate And Cause Loss Of Brake Fluid. Consequence Of Defect: A Loss Of Brake Fluid Leads To Loss Of Rear Brake Action, Creating The Potential For An Accident. Front Brakes Would Remain Operational.


GMC Caballero (1986) – 07E088000

Vehicle recall defect – Certain Honeywell Fram Racing Brand Hp4 And Hp8 Oil Filters That Were Manufactured From May 25, 2006, Through September 14, 2007, And Sold For Use As Replacement Equipment For Vehicles List Above. The Affected Filters Are Marked With A Date Code A61451 Through A72571 Sequentially. The Date Code And Part Number Appear On The Filter Housing. Fram Racing Hp4 And Hp8 Oil Filters Not Bearing A Date Code In This Range Are Not Affected By This Recall. The Gasket Of The Oil Filter Becomes More Pliable Under High Temperatures And Pressures.


GMC Caballero (1979) – 84V149000

Vehicle recall defect – Rear Axle Assembly May Have Axles That Were Improperly Manufactured. This Condition May Result In Separation Of The Axle Shaft And Wheel Assembly From The Vehicle.