Cooper 10165 – 82T009000
Vehicle recall defect – The Involved Tires Do Not Conform To Federal Motor Vehicle Safety Standard No. 119, “New Pneumatic Tires For Vehicles Other Than Passenger Cars”. These Tires May Develop A Separation In The Shoulder Area. This Condition Will Cause A Vibration When The Tire Is In Use. If The Vibration Is Ignored Or The Separation Is Not Detected, Continued Use May Cause The Tire To Fail Losing The Inflating Air.
Cooper 1000R20 – 77T023000
Vehicle recall defect – The Involved Tires May Develop Separation In The Lower Sidewall Area When Run In An Overloaded Or Under-Inflated Condition. This Condition Will Develop A Visible Circumferential Crack Or Bulge Above The Rim Flange. Continued Operation May Cause The Ply Cords To Part And Expose Or Pinch The Inner Tube, Possibly Resulting In Loss Of Inflating Air.
Cooper 100022 – 82T007000
Vehicle recall defect – Some Of The These Tires May Develop Separation In The Tread Area. Under This CircuMSTance, The Tread Of The Tire Will Bulge.
Cooper 100020 – 77T020000
Vehicle recall defect – The Involved Tires May Be In Non-Compliance With Federal Motor Vehicle Safety Standard No. 119, “New Pneumatic Tires For Vehicles Other Than Passenger Cars”, Due To Possible Development Of Separation In The Shoulder Area When Run In An Overloaded Or Under-Inflated Condition. Continued Use May Cause The Ply Cords To Break And Chafe The Inner Tube.
Cooper 1000165 – 83T006000
Vehicle recall defect – Tires May Develop A Separation Of The Reinforcing Plies From The Rubber Compound In The Shoulder Area Of The Tread. Tires Do Not Comply With The Endurance Requirements Of Federal Motor Vehicle Safety Standard No. 119, “New Pneumatic Tires For Vehicles Other Than Passenger Cars”.
Cooper 11R22514 – 94T001000
Vehicle recall defect – Some Tires Have A Less Than Adequate Or Thin Inner Liner That Can Result In A Sudden Loss Of Air Pressure.