Vehicle recall defect – Meritor Elucid Tie Rods Part Nos. E-10148 And E-10149. The Tie Rod End Can Pull Outboard And Separate From The Tie Rod Tube Due To Improper Thread Engagement Between The Male Tie Rod End And The Female Tube.
Vehicle recall defect – Meritor, Inc. Is Recalling Certain Axle Assemblies That Were Built With Disc Brakes Using MGM J24 Series Air Brake Chambers. In The Affected Axles, The Brake Chambers May Leak Pressure Allowing The Parking Brake To Drag When It Is Supposed To Be Released. Brake Dragging Could Lead To Overheated Brake Components.
Vehicle recall defect – This Is Not A Safety Recall In Accordance With The Safety Act. However, It Is Deemed A Safety Improvement Campaign By The Agency. Equipment Description: Brake Camshafts In Trailer Axles. Certain Trailer Axle Assemblies Have Been Manufactured With Incorrectly Installed Brake Camshafts.
Vehicle recall defect – Meritor, Inc. (Meritor) Is Recalling Certain Meritor Mx10-120Evo, Mx12-120Evo And Mx14-120Evo Steer Axles. The Axles May Have Insufficient Lubrication, Which May Result In Damage To The Wheel End Bearings.
Vehicle recall defect – Meritor, Inc. (Meritor) Is Recalling Certain Mx10-120Evo, Mx12-120Evo, And Mx14-120Evo Steer Axles. The Axles May Have Insufficient Lubrication, Which May Result In Damage To The Wheel End Bearings.
Vehicle recall defect – Meritor Inc. (Meritor) Is Recalling Certain 71000 Series DrUM Axles, 71000 Series Disc Brake Axles, And 79000 Series Disc Brake Axles Manufactured April 22, 2016, To September 9, 2016. The Affected Axles May Have Insufficient Grease At The Wheel Ends, Possibly Resulting In Bearing Failure.
Vehicle recall defect – Meritor Is Recalling Certain Driveline Assemblies, Part Numbers Rpl25, 18N, And 18Mxl, Sold As Aftermarket Equipment For Use On, Or Installed As Original Equipment On, Various Heavy Trucks. The Tubing Used To Assemble The Affected Drivelines Has A Nonconforming Seam Weld With Insufficient Bonding Of The Material.
Vehicle recall defect – Meritor Is Recalling Certain Driveline Assemblies, Part Numbers Rpl25, 18N, And 18Mxl, Sold As Aftermarket Equipment For Use On, Or Installed As Original Equipment On, Various Heavy Trucks. The Tubing Used To Assemble The Affected Drivelines Has A Nonconforming Seam Weld With Insufficient Bonding Of The Material.
Vehicle recall defect – Meritor, Inc. (Meritor) Is Recalling Certain Op Shaft Subassemblies, Part Number 68324870, Used In Meritor Ex225 Disc Brake Calipers. The Drive Pins May Have Been Cracked During Assembly Possibly Resulting In The Pins Fully Fracturing.
Vehicle recall defect – Meritor, Inc. (Meritor) Is Recalling Certain Meritor Ex225L2, Ex225L+, And Bendix Adb22X Axles Manufactured December 9, 2013, To August 25, 2015. The Affected Axle Assemblies Have Caliper Bolts That May Not Have Been Properly Tightened, Allowing The Caliper Mounting Bolts To Back Out And The Caliper To Detach From The Axle Flange.