reliant

Vehicle recall defect – The Brake Hydraulic System Bay Be Equipped With Brake Fluid Containing An Excess Of Water.

Vehicle recall defect – Clamp Bolts Installed On Certain Vehicles May Contain Cracks. Eventually These Bolts May Break Through, Causing Separation Of The Ball Joint From The Steering Knuckle.

Vehicle recall defect – The Automatic Speed Control Switch May Stick In The “Resume” Position RestriCTIng Return Movement. This Will Not Allow The Normal Brake Pedal Operation To DeActivate The System.

Vehicle recall defect – Front Suspension Crossmember May Corrode And Fail At Lower Control Arm Rear Pivot Mounts If Operated Where Salt Is Used To Aid In Snow Removal.

Vehicle recall defect – The Automatic Speed Control Switch May Stick In The “Resume” Position RestriCTIng Return Movement. This Will Not Allow The Normal Brake Pedal Operation To DeActivate The System.

Vehicle recall defect – The Stop Lamp Switches Installed On The Subject Vehicles May Have Inadequate Internal Switch Contact Pressure Due To An Incorrect Formation Of The Switch Contact Terminals. This Lack Of Switch Contact Continuity May Render The (Stop) Brake Warning Lights Inoperative.

Vehicle recall defect – Brake Fluid May Contain An Excessive Amount Of Water. This Can Cause Degradation Of Braking Performance Or Brake Failure Under A Variety Of CircuMSTances.

Vehicle recall defect – Federal Mogul Is Recalling 6,903 Aftermarket Ball Joint Assemblies Shipped Between November 9, 2007 And March 26, 2008, Which May Have Been Packaged With Incorrect Nuts. The Part Numbers Packaged With Incorrect Nuts Are: K7147, K7329, K8683, And 104353. These Parts Were Made For Use On The Various Vehicles Listed Above.

Vehicle recall defect – The Potential For Fuel Leakage Exists In The Engine Compartment At The Fuel Reservoir Seam And Its Hose ConneCTIons. The Fuel Reservoir Is A Silver Colored Can Mounted To The Air Cleaner.

Vehicle recall defect – Federal Mogul Is Recalling 6,903 Aftermarket Ball Joint Assemblies Shipped Between November 9, 2007 And March 26, 2008, Which May Have Been Packaged With Incorrect Nuts. The Part Numbers Packaged With Incorrect Nuts Are: K7147, K7329, K8683, And 104353. These Parts Were Made For Use On The Various Vehicles Listed Above.