Strick semi trailer hub failures

An NHTSA Preliminary Evaluation into Strick vehicles. Closed 12 November 2003.

Investigation
PE03027
Type
Preliminary Evaluation
Opened
30 June 2003
Closed
12 November 2003

What NHTSA investigated

Odi opened this investigation based on a fleet complaint where information was furnished indicating that wheel bearings were failing at an unusually high rate.in 29 cases these failures allegedly resulted in a wheel end fire or a wheel separation.during the investigation it was determined that the subject vehicles were built with low maintenance wheel ends.documents obtained by odi indicate that widespread confusion existed in this industry concerning maintenance requirements.the issues were:frequency of maintenance, amount of grease to be used, and proper method of inspection.several meetings were held involving the axle manufacturer, (arvinmeritor), lubrication manufacturer (mobil), several trailer manufacturers and fleets.currently odi has data which indicates that 255 trailers from a certain build period have wheel ends failing at a higher rate than peer trailers with the same wheel ends.odi is upgrading this investigation to determine why the one group is failing at a higher rate than others with the same wheel ends.in order to resolve this matter, odi will be contacting the axle manufacturer, the bearing and grease manufacturers, fleets and will further investigate the issue with strick directly.

Vehicles covered

MakeModelModel years
Strick0400CD1999–2003
StrickSTRICKModel year not recorded
StrickTRAILER1997–2001
StrickVAN2000–2003

Source

From NHTSA’s investigation file, rebuilt daily. To report a problem with your own vehicle, go to nhtsa.gov/report-a-safety-problem. All open investigations.