Throttle cable binding

An NHTSA Preliminary Evaluation into Kia vehicles. Closed 27 January 2005.

Investigation
PE04067
Type
Preliminary Evaluation
Opened
24 September 2004
Closed
27 January 2005

What NHTSA investigated

Kia provided information describing a water entry point at the rubber sealing boot located at the throttle body end of the throttle cable, advising that water could enter the cable sheath during normal vehicle operation.in low temperatures, the water freezes and may impede the movement of the throttle cable thereby preventing an open throttle from returning to the closed position.a stuck throttle could increase the risk of a crash.to prevent water ingress, kia increased the crimping force of the clamp installed on the rubber boot from 2 to 5 kilograms force.the action took place in april 2004 and occurred in connection with other changes to the throttle cable system.to remedy the vehicles built before this date (all of my 2002 and part of 2003), kia will conduct a safety recall to replace the defective cable with an improved component.certain recalled vehicles will also have an additional clip installed to address a potential cable disengagement concern.see kia's january 17, 2005 part 573 letter for NHTSA recall 05V013 (kia recall SC-042) for further information.no action is being taken on vehicles built after april 4, 2004.

Recalls that followed

  1. Kia — Vehicle Speed Control: Cables05V32900020 July 2005118,447 vehicles
  2. Kia — Vehicle Speed Control: Cables05V01300019 January 200589,238 vehicles

Vehicles covered

MakeModelModel years
KiaSEDONA2002–2004

Source

From NHTSA’s investigation file, rebuilt daily. To report a problem with your own vehicle, go to nhtsa.gov/report-a-safety-problem. All open investigations.