Automatic transmission control

An NHTSA Recall Query into Ford vehicles. Closed 27 August 1998.

Investigation
RQ98005
Type
Recall Query
Opened
13 March 1998
Closed
27 August 1998

What NHTSA investigated

On september 4, 1997, ford filed a defect information report concerning approximately 15,000 1997 model year F-150 trucks, manufactured from february 16 through march 4, 1996, and built at the norfolk or kansas city assembly plants.these vehicles could have incorrectly manufactured automatic transmission control cables installed which can result in a separation of the cable end fitting from the cable conduit at the transmission end of the cable.if the transmisssion end fitting were to separate from the shift cable assembly, theoperator would not be able to shift the transmission from one of the drive gear positions into the park position even though the gear shift selector would indicate park.odi has received 6 reports alleging transmission fault shifting resulting in 3 crashes.the reported vehicles were identified as follows:three were manuactured outside of the recall build dates; two were within the scope of the recall and the remaining vehicle was unknown due to missing vin.the purpose of this investigation is to examine the scope of recall 97V-147, in particular, the basis for limiting the recall to those built within a specific time period and whether the cable is used on other ford vehicles.

The recall that followed

  1. Ford — Power Train: Automatic Transmission97V1470009 September 199715,500 vehicles

Vehicles covered

MakeModelModel years
FordF-1501997

Source

From NHTSA’s investigation file, rebuilt daily. To report a problem with your own vehicle, go to nhtsa.gov/report-a-safety-problem. All open investigations.