Vehicle recall defect – Inadequate Fastening Of The Brackets To The Frame Rail For Holding The Hydraulic Brake And Gas Return Lines May Allow Flexing And Possible Chafing Of The Line. Consequence Of Defect: Lines Could Wear Through And Rupture Resulting In (1) Leakage Of Gasoline Which Is A Fire Hazard And/Or (2) Loss Of Hydraulic Fluid, Causing Loss Of Brakes To The Rear Axles Which May Result In An Accident.
Vehicle recall defect – The Storage Compartment At The Rear Of The Unit Does Not Have A Specified Storage Weight Limitation And Can Therefore Be Loaded Beyond The Manufacturer’S Intentions. Also Some Units Were Designed With A Fresh Water Tank Located At The Rear Of The Unit. As A Result, These Trailers Exhibit Reduced Stability While Being Towed.
Vehicle recall defect – The Suspension Coil Spring Box Mounting Brackets, Which Are Fastened To The Main Chassis Frame, May Fail.
Vehicle recall defect – Two Latches Mounted On Each Side Of The Rear Engine Access Cover And Secure The Cover When The Motorhome Is In Transit Were Not Positioned Correctly.
Vehicle recall defect – Leak In Lp Gas Service Line Caused By Line ContActing Rear Suspension System Which Results In Line Rupture.
Vehicle recall defect – High Temperatures Produced By The Generator Exhaust Pipe Can Result In Heat Distortion And Subsequent Rupture Of The Air Lines. A Rupture Would Cause A MalfunCTIon Of The Instrument Panel Air Pressure Gauges And/Or Engagement Of The Manual Parking/Emergency Brake.
Vehicle recall defect – Under Heavy Demand On The Engine And Transmission, The Transmission Cooler Line Temperature Can Exceed The Temperature Rating Of Both The Plastic Conduit And Insulation For The Battery Cable.
Vehicle recall defect – Improper Torque Of The Retaining Bolts And Nuts Of The Steering Column Slip Shaft, Which Provides The ConneCTIng Link Between The Upper Steering Column And The Steering Gear Box, May Cause The Steering Column Slip Shaft To Separate At Either The Upper Or Lower ConneCTIon Of The Shaft.
Vehicle recall defect – Routing Of The Headlight And Clearance Light Circuits Through A Single 20 Amp Fuse And/Or Breaker Which Is Not Adquate For The Load Created By Both Circuits.
Vehicle recall defect – High Temperatures Produced By The Generator Exhaust Pipe Can Result In Heat Distortion And Subsequent Rupture Of The Air Lines. A Rupture Would Cause A MalfunCTIon Of The Instrument Panel Air Pressure Gauges And/Or Engagement Of The Manual Parking/Emergency Brake.