Vehicle recall defect – The Involved Vehicles Do Not Comply With Federal Motor Vehicle Safety Standard No. 108, “Lamps, RefleCTIve Devices And Associated Equipment”. This Is Due To The Omission Of An Illuminating Indicator To Warn The Operator If A Signal Lamp Burns Out Or Otherwise Fails To Operate.
Vehicle recall defect – Vehicle Description: 3-Wheel On-Road Police Vehicles. A Splash Guard Fitted To The Frame Of The Vehicle, Located Above The Differential, Could Come In Contact With The Rear Brake Lines, Causing Damage Or Leakage. The Models Involved Are: 1996-2001 Models 898465B Manufactured From October 1996 To July 2001; 1994-2001 Models 878464B Manufactured From November 1, 1994 To July 2001; 1997-2000 Models 878474D Manufactured From May 1, 1997 To December 24, 2000; 1997-2000 Models 898474E Manufactured From February 1, 2000 To July 2001; 2000-2001 Models 898487 Manufactured From May 1, 2000 To July 2001; And 2000-2001 Models 898488 Manufactured From July 1, 2000 To July 2001.
Vehicle recall defect – Vehicle Description: 3-Wheel On-Road Police Vehicles. A Plastic Tee Fitting Located On The Fuel Line Could Crack Resulting In A Fuel System Leak.
Vehicle recall defect – Vehicle Description: 3-Wheel On-Road Police Vehicles. Two Valve Switches Located On The Master Cylinder That Reads The Brake Line Pressure Can Give Faulty Failure Codes To The Dash Or Not Failure Code At All.
Vehicle recall defect – Vehicle Description: 3-Wheel On-Road Police Vehicles. A Splash Guard Fitted To The Frame Of The Vehicle, Located Above The Differential, Could Come In Contact With The Rear Brake Lines, Causing Damage Or Leakage. The Models Involved Are: 1996-2001 Models 898465B Manufactured From October 1996 To July 2001; 1994-2001 Models 878464B Manufactured From November 1, 1994 To July 2001; 1997-2000 Models 878474D Manufactured From May 1, 1997 To December 24, 2000; 1997-2000 Models 898474E Manufactured From February 1, 2000 To July 2001; 2000-2001 Models 898487 Manufactured From May 1, 2000 To July 2001; And 2000-2001 Models 898488 Manufactured From July 1, 2000 To July 2001.
Vehicle recall defect – Vehicle Description: 3-Wheel On-Road Police Vehicles. A Plastic Tee Fitting Located On The Fuel Line Could Crack Resulting In A Fuel System Leak.
Vehicle recall defect – A Change In The Front Fork Made To Accommodate The 12″ Wheel Can Cause Excessive Brake Line Stretch When The Fork Is Bottomed Out. This Can Cause The Line To Leak Brake Fluid.
Vehicle recall defect – On The Involved Vehicles, A Substandard Weld May Exist In The Area Which Joins The Inner And Outer Wheel Rim Together. If The Weld Were To Fail During Re-Inflation Of The Tire, The Rim Halves Could Separate.
Vehicle recall defect – On The Involved Vehicles, A Substandard Weld May Exist In The Area Which Joins The Inner And Outer Wheel Rim Together. If The Weld Were To Fail During Re-Inflation Of The Tire, The Rim Halves Could Separate.
Vehicle recall defect – On The Involved Vehicles, A Substandard Weld May Exist In The Area Which Joins The Inner And Outer Wheel Rim Together. If The Weld Were To Fail During Re-Inflation Of The Tire, The Rim Halves Could Separate.