Vehicle recall defect – On Certain Trucks Equipped With Bendix Sr-7 Spring Brake Modulating Valves, The Internal Rubber Check Valve May Leak Causing A Delay In The Application Of The Spring Brakes To Park The Vehicle After The Operator Pulls The Dash Valve Button.
Vehicle recall defect – Mack Is Recalling 34,269 My 1999-2005 Cx And My 2004-2008 Cxn Trucks. The Headlight Switch May Prematurely Fail Resulting In Inoperative Or Intermittent Headlights.
Vehicle recall defect – On Certain Trucks Equipped With A Saf Holland Simplex Fifth Wheel, The Lever Arm Pivot Bolt May Have Been Over Tightened. An Over Tightened Pivot Bolt Can Distort The Pivot Bolt Spacer Sleeve, Which May Prevent The Fifth Wheel Latch Jaw From Closing And Latching Securely Around The Trailer King Pin.
Vehicle recall defect – On Certain Trucks Equipped With Aset Ac Model Engines, The Engine As Configured With An External Exhaust Gas Recirculation System Makes SeRVIcing The Fuel InjeCTIon Lines Difficult When Using Traditional Tools. Therefore, It Is Possible For Fuel Leaks To Develop When Removing And Installing The Fuel InjeCTIon Lines.
Vehicle recall defect – On Certain Trucks Equipped With Parker Single Check Valves (Scv) Provided By Bendix. The Defect Exists In The Parker Scv That Connects With The Supply Port Of The Sr-7 Spring Brake Modulating Valve. After Prolonged Use Of The Parker Scv, The Valve Body Retainer May Become Excessively Worn And Eventually Break Apart. Pieces Of The Parker Scv Can Become Lodged Inside The Sr-7 Spring Brake Modulating Valve, Potentially Causing Either Leakage Out Of The Sr-7 Valve Or Preventing Air From Properly Exhausting From The Sr-7 Valve.
Vehicle recall defect – On Certain Trucks Equipped With Bendix Sr-7 Spring Brake Modulating Valves, The Internal Rubber Check Valve May Leak Causing A Delay In The Application Of The Spring Brakes To Park The Vehicle After The Operator Pulls The Dash Valve Button.
Vehicle recall defect – On Certain Trucks, An Unprotected Lead In The Thermoswitch Of The Heater May Make Contact With Another Post Possibly Creating A Short Circuit, Which Can Result In Continuous Operation Of The Heating Element.
Vehicle recall defect – Certain Trucks Were Recalled For The Installation Of Sleeves On The Fuel InjeCTIon Line As Required By Safety Recall Sc0317 (Nhtsa Recall No. 06V392). There Is A Possibility That The New Sleeves May Chafe The Fuel InjeCTIon Line.