d40lfr

Vehicle recall defect – New Flyer Industries, Ltd. (New Flyer) Is Recalling Certain Model Year 2015 New Flyer Md30, 2012 C35Lfr, 2010-2011 D35Lfr, Nabi 35Lfw, 2011 D40Lfr, 2010-2012 D60Lfr And Nabi 31Lfw, 2010 C40Lf, De35Lf, D40Lf, De40Lfa, De60Lfa, Ge35Lfr And Ge40Lf, 2009 De60Lf And Ge40Lfr, 2010-2013 C40Lfr, De60Lfr, Nabi 416 And Nabi 60Brt, 2010-2015 Xd35, Xde40, Nabi 40Lfw And 42Brt, 2011-2015 Xd40 And Xn40, 2013-2015 Xd60, Xde60 And Xn35, 2010-2014 Xde35, 2013 Xe40, 2012-2015 Xn60, Equipped With Certain Recaro Ergo-M Commercial Bus Driver Seats. The Affected Seats Have J-Brackets That May Be Missing Welds Which Could Allow The Seat Belt Anchorage Assembly To Separate From The J-Bracket.

Vehicle recall defect – New Flyer Is Recalling Certain Model Year 2010-2012 Transit Buses, Models C40Lf, C40Lfr, D35Lfr, D40Lfr, D60Lfr, Xd35, Xd40, Xde35, Xde40, And Xn40. Air Pressure May Leak From The Parking Brake Chambers Causing The Parking Brakes To Drag While The Vehicle Is Driven.

Vehicle recall defect – New Flyer Is Recalling Certain Model Year 2010 Heavy Duty Transit Buses, Models D35Lfr, D40Lfr, D60Lfr, De40Lfr, De60Lfr, Xd35, Xde35, And Xde40, Manufactured From September 30, 2010, Through June 3, 2011, Equipped With A Cummins Isb, Isl, Isc, Or Isx Diesel Engine. The V-Band Clamp Assembly, Part Numbers Q187684, Q187685, And Q187686, Used To Connect The Inlet And Outlet Cone SeCTIons To The Diesel Oxidation Catalyst (Doc)/Diesel Particulate Filter (Dpf) Include A T-Bolt Which Can Fracture And Fail When Subjected To Stress Or Load. A Fracture Or Failure Of The T-Bolt May Cause The Clamp To Loosen And The Inlet Or Outlet SeCTIons Attached To The Doc/Dpf Housing To Disconnect.

Vehicle recall defect – New Flyer Is Recalling Certain Model Year 2007-2011 Low Floor Transit Buses Produced From May 24, 2007, Through March 1, 2011 And Equipped With Teeter Lever Assemblies. There Is Insufficient Engagement Between The Teeter Lever Base And The Cam Plate.

Vehicle recall defect – New Flyer Is Recalling Certain Model Year 2004-2011 Transit Buses, Models: C35Lf, C40Lfr, D35Lfr, D40Lf, D40Lfr, D60Lf, D60Lfa, D60Lfr, De35Lfa, De40Lf, De40Lfa, De40Lfr, De60Lf, De60Lfa, De60Lfr, And Xde40. The Drive Shaft Access Panel May Have Insufficient Strength Or Be Not Properly Secured To The Floor. If The Drive Shaft Fails, Debris From The Driveshaft Failure May Enter The Passenger Compartment Through The Panel.

Vehicle recall defect – New Flyer Is Recalling Certain Model Year 2007-2011 Low Floor Transit Buses Produced From May 24, 2007, Through March 1, 2011 And Equipped With Teeter Lever Assemblies. There Is Insufficient Engagement Between The Teeter Lever Base And The Cam Plate.

Vehicle recall defect – New Flyer Is Recalling Certain Model Year 2004-2009 Transit Buses. These Models Have An InspeCTIon Panel Located Above The Drive Shaft In The Passenger Compartment Flooring For Easy InspeCTIon And Removal Of The Drive Shaft. This Panel May Not Be Of Sufficient Strength To Prevent Foreign Matter From Entering The Passenger Compartment In The Event Of A Drive Shaft Failure.

Vehicle recall defect – New Flyer Is Recalling Certain Model Year 2004-2011 Transit Buses, Models: C35Lf, C40Lfr, D35Lfr, D40Lf, D40Lfr, D60Lf, D60Lfa, D60Lfr, De35Lfa, De40Lf, De40Lfa, De40Lfr, De60Lf, De60Lfa, De60Lfr, And Xde40. The Drive Shaft Access Panel May Have Insufficient Strength Or Be Not Properly Secured To The Floor. If The Drive Shaft Fails, Debris From The Driveshaft Failure May Enter The Passenger Compartment Through The Panel.

Vehicle recall defect – New Flyer Is Recalling Certain Model Year 2007-2011 Low Floor Transit Buses Produced From May 24, 2007, Through March 1, 2011 And Equipped With Teeter Lever Assemblies. There Is Insufficient Engagement Between The Teeter Lever Base And The Cam Plate.

Vehicle recall defect – New Flyer Is Recalling Certain Model Year 2008 D40Lfr And Model Year 2009 De60Lfr Heavy Duty Low Floor Transit Buses Equipped With TRW Igen3 Intermediate Steering Columns. The Weld Around The Igen3 Steering Shaft Tube That Secures The Spline Tube To The Intermediate Tube May Be Mis-Located.