f700

Ford F700 (1980) – 80V089000

Vehicle recall defect – On Certain Vehicles, Two Fuel Line Brackets Were Incorrectly Positioned, Allowing The Fuel Line To Come Into Contact With The Left Hand Front Brake Jounce Hose. Contact With The Fuel Line, Which Has A Metal Outer Shield, Could Cause Chafing Of The Brake Hose.


Ford F700 (1979) – 79V054000

Vehicle recall defect – The Air Brake Lines May Be Routed Too Close To The Exhaust Muffler. Because The Air Brake Lines Are Made Of Nylon Material, Heat From The Exhaust Muffler Can Weaken The Brake Line Tubes, Possibly Causing Them To Rupture. Tube Rupture Could Result In Loss Of Air In The Secondary Air Brake System.


Ford F700 (1979) – 07E064000

Vehicle recall defect – Certain Federal-Mogul Aftermarket Fuel Pumps Sold Under The Brand Names Of Carter, Accuflow, Napa, Truflow, Parts Depo, And Parts Master, Shipped Between August 2006 And July 2007 For Use On The Vehicles Listed Above. The Fuel Pump DiaphraGM In Certain ProduCTIon Runs May Have Been Improperly Installed Or Inadequately Tested Which May Cause The Fuel Pump To Leak.


Ford F700 (1993) – 93V160000

Vehicle recall defect – As A Result Of Inherent Vibration In These Engines, The Throttle Return Springs Can Fracture.


Ford F700 (1992) – 93V160000

Vehicle recall defect – As A Result Of Inherent Vibration In These Engines, The Throttle Return Springs Can Fracture.


Ford F700 (1992) – 92V006000

Vehicle recall defect – Water Can Enter The Door Latch Release Cable. If The Vehicle Is Operated In Below Freezing Temperatures, The Water In The Door Latch Release Cable Can Freeze And Cause The Latch Mechanism To MalfunCTIon.


Ford F700 (1991) – 91V071000

Vehicle recall defect – The Throttle Cable Which Runs From The Accelerator To The Governor Assembly Housing May Have Been Kinked During Assembly, Causing Excessive Wear Of The Cable Housing Inner Lining. This Could Result In Either Fracture Or Sticking Of The Cable.


Ford F700 (1990) – 91V071000

Vehicle recall defect – The Throttle Cable Which Runs From The Accelerator To The Governor Assembly Housing May Have Been Kinked During Assembly, Causing Excessive Wear Of The Cable Housing Inner Lining. This Could Result In Either Fracture Or Sticking Of The Cable.