flxible

Vehicle recall defect – The SeCTIon That Carries The Power Cables From The Batteries To The Engine (Called The “Hat” SeCTIon) Could Fracture Causing The Main Power Cable To Chafe.

Vehicle recall defect – The Set-Screw May Not Be Positioned Correctly, Allowing The Drive Key To Slide Out Of The Hub And The Hub And Sprocket To Disengage. This Would Cause The Wheelchair Platform To Fall To The Ground Without Prior Warning.

Vehicle recall defect – Under Certain Operating Road Conditions, The Power Cables Contained In A Tube Between The Batteries And The Engine Can Move Freely. This Movement Could Cause The Main Power Cable To Chafe, Leading To An Electrical Short.

Vehicle recall defect – Cracks May Develop In The Trunnion To Which The Apex Of The “A-Frame” Is Attached. These Cracks May Progress To The Point That The Trunnion Could Fail And The A-Frame Could Separate From It. If This Occurs, The A-Frame Could Come Into Contact With The Conduit Carrying Air, As Well As The Electrical And Fuel Lines.

Vehicle recall defect – Misalignment Between The Steering Column Assembly And The Gear Box.

Vehicle recall defect – On Certain Vehicles, The Driver”S Barrier Glazing Was Not Marked As Safety Glazing Material. This Does Not Meet The Requirements Of Federal Motor Vehicle Safety Standard No. 205, “Glazing Materials”.

Vehicle recall defect – The Air Starter Control Valve Is Equipped With A Manual Override Push-Button Which Bypasses The Normal Neutral Safety Interlock And Is Not In Compliance With Federal Motor Vehicle Safety Standard 102, “Transmission Shift Lever Sequence, Starter Interlock, And Transmission Braking Effect”.

Vehicle recall defect – The Power Cables Leading From The Batteries Of The Involved Vehicles Are Subject To A Chafing Condition, Which, If Undetected Or Not Corrected Can Cause Wear To The Cable Insulation.

Vehicle recall defect – Some Buses May Have Misalignment Of The Steering Column Assembly And The Gear Box.

Vehicle recall defect – The Chain Drive Weldment May Fail Under A Lift Load Allowing The Wheelchair Platform To Fall To The Ground. Also, The Top Knuckle Joint Weldment May Contain DefeCTIve Welds.