Goodyear 12165 – 90T004000
Vehicle recall defect – Tires Do Not Have Treadwear Indicator Molded In The Tire To Enable A Person To Visually Determine When Tire Is Worn Down To One-Sixteenth Of An Inch And Must Be Replaced.
Goodyear 11R245 – 82T014000
Vehicle recall defect – The Involved Tires May Have Less Rubber Insulation Between The Inside Extremity Of The Bead Bundle And Wire Ply Stock Than Is Desirable. This Condition Results In A Fretting Or Fraying Action Of The Wire Ply Stock When Contact Is Made With The Bead Bundle. This Could Result In Broken Ply Cord Wires Manifested By A Rectangular Shaped Bulge On The Sidewall Of The Tire, Which Could Lead To Sudden Air Loss.
Goodyear 11R225 – 82T014000
Vehicle recall defect – The Involved Tires May Have Less Rubber Insulation Between The Inside Extremity Of The Bead Bundle And Wire Ply Stock Than Is Desirable. This Condition Results In A Fretting Or Fraying Action Of The Wire Ply Stock When Contact Is Made With The Bead Bundle. This Could Result In Broken Ply Cord Wires Manifested By A Rectangular Shaped Bulge On The Sidewall Of The Tire, Which Could Lead To Sudden Air Loss.
Goodyear 1100225 – 78T013000
Vehicle recall defect – The Involved Tires Contain Ply Endings In The Outer Two Layers Of Ply Fabric Which Do Not Extend Under The Bead Bundle To The Bead Toe. This Causes The Bead Area Of The Tire To Chafe Against The Metal Rim And Slowly Leak Air.
Goodyear 1100225 – 77T012000
Vehicle recall defect – The Involved Tires Failed To Meet The Requirements Of Federal Motor Vehicle Safety Standard No. 119, “New Pneumatic Tires For Vehicles Other Than Passenger Cars”, Due To Separation In The Shoulder Area. This Condition Will Result In Vibration And Sudden Loss Of Air From Tire.
Goodyear 950R165 – 78T018000
Vehicle recall defect – The Involved Tires May Develop Separation Between The Belt Plies. As A Result, Belt Separation Or Separation At The Belt Edge May Occur.