Vehicle recall defect – Exhaust Emissions (Carbon Monoxide) May Enter The Interior Of The Vehicle When The Exhaust Pipe Is Substantially Out The Design Position, Deteriorated From Use, Or When An Opening In The Body Develops Near The Exhaust Outlet And, At The Same Time, A Negative Air Pressure Occurs In The Vehicle Interior.
Vehicle recall defect – There Is A Possibility That A Separated Motor Mount May Allow The Engine To Lift, Which May Affect The Throttle Linkage, Momentarily Increasing Throttle, Possibly To Full Throttle.
Vehicle recall defect – Exhaust Emissions (Carbon Monoxide) May Enter The Interior Of The Vehicle When The Exhaust Pipe Is Substantially Out The Design Position, Deteriorated From Use, Or When An Opening In The Body Develops Near The Exhaust Outlet And, At The Same Time, A Negative Air Pressure Occurs In The Vehicle Interior.
Vehicle recall defect – There Is A Possibility That A Separated Motor Mount May Allow The Engine To Lift, Which May Affect The Throttle Linkage, Momentarily Increasing Throttle, Possibly To Full Throttle.
Vehicle recall defect – Exhaust Emissions (Carbon Monoxide) May Enter The Interior Of The Vehicle When The Exhaust Pipe Is Substantially Out The Design Position, Deteriorated From Use, Or When An Opening In The Body Develops Near The Exhaust Outlet And, At The Same Time, A Negative Air Pressure Occurs In The Vehicle Interior.
Vehicle recall defect – On The Involved Vehicles The Brake Stoplight And Cruise Control Switch Which Is Operated By The Brake Pedal May Have Been Assembled With An Incorrect Lubricant On The Actuating Plunger. This Can Cause The Rear Brake Stoplights To Become Inoperative And The Cruise Control, If Activated, To Stay Electrically Engaged.
Vehicle recall defect – A Child Could Open The Rear Side Compartment Door And Enter This Compartment. The Child Could Become Entrapped If The Door Were To Close, As It Cannot Be Unlatched From The Inside.
Vehicle recall defect – The Involved Vehicles Do Not Conform To Federal Motor Vehicle Safety Standard No. 207, “Anchorage Of Seats”, In That The Front Seat Adjuster Assemblies Have Lock Bars Which May Not Remain Engaged When Test Procedure Forces Are Applied To The Seat.
Vehicle recall defect – The Rear Wheel Mounting Bolts On The Affected Vehicles, Are Brittle And Therefore May Fracture. This Brittleness Is Due To Improper Heat Treatment During Manufacture. If The Bolts Break, The Tire And Wheel Assembly May Separate From The Vehicle.