mb300

Plymouth Mb300 (1974) – 80V073000

Vehicle recall defect – Due To A Combination Of Disc Brake Pad Wear And Turn Stop Wear On Certain Vehicles, There May Be An Increase In Brake Pedal Travel And A ReduCTIon In Front Braking EffeCTIveness Following A Full Turn. Also, A Frame Crack Could Develop And Could Extend Through All Or Most Of The Rail SeCTIon.


Plymouth Mb300 (1973) – 80V073000

Vehicle recall defect – Due To A Combination Of Disc Brake Pad Wear And Turn Stop Wear On Certain Vehicles, There May Be An Increase In Brake Pedal Travel And A ReduCTIon In Front Braking EffeCTIveness Following A Full Turn. Also, A Frame Crack Could Develop And Could Extend Through All Or Most Of The Rail SeCTIon.


Plymouth Mb300 (1979) – 79V176000

Vehicle recall defect – Condensate Water May Accumulate In The Air Conditioning Blower Housing; There Is A High Probability That This Water Will Cause The Blower Motor To Fail. Blower Motor Failure Would Disable The Air Condtioning Unit And There Would Be No Way To Defrost Or Defog The Windshield.


Plymouth Mb300 (1979) – 79V104000

Vehicle recall defect – Lower Control Arms May Fracture In The Area Adjacent To The Lower Ball Joint, Resulting In Separation Of The Ball Joint From The Arm.


Plymouth Mb300 (1978) – 79V105000

Vehicle recall defect – The Front Brake Hose Routing May Allow Interference Between The Hoses And The Tire And Wheel Assemblies During Extreme Turning Angles.


Plymouth Mb300 (1977) – 80V073000

Vehicle recall defect – Due To A Combination Of Disc Brake Pad Wear And Turn Stop Wear On Certain Vehicles, There May Be An Increase In Brake Pedal Travel And A ReduCTIon In Front Braking EffeCTIveness Following A Full Turn. Also, A Frame Crack Could Develop And Could Extend Through All Or Most Of The Rail SeCTIon.


Plymouth Mb300 (1976) – 80V073000

Vehicle recall defect – Due To A Combination Of Disc Brake Pad Wear And Turn Stop Wear On Certain Vehicles, There May Be An Increase In Brake Pedal Travel And A ReduCTIon In Front Braking EffeCTIveness Following A Full Turn. Also, A Frame Crack Could Develop And Could Extend Through All Or Most Of The Rail SeCTIon.


Plymouth Mb300 (1975) – 80V073000

Vehicle recall defect – Due To A Combination Of Disc Brake Pad Wear And Turn Stop Wear On Certain Vehicles, There May Be An Increase In Brake Pedal Travel And A ReduCTIon In Front Braking EffeCTIveness Following A Full Turn. Also, A Frame Crack Could Develop And Could Extend Through All Or Most Of The Rail SeCTIon.