Vehicle recall defect – Medtec Ambulance Is Recalling Certain Model Year 2007-2009 Ad-170, Fd-160 And Pd-168 Ambulances Equipped With Carrier Airv Ceiling Units, Model Nos. 68Rv0010Ba, 68Rv0012Ca, And 68Rv0010Ea. The Heater Element In These Assemblies May Be DefeCTIve Which Could Cause The Unit To Create Smoke Or Sparks.
Vehicle recall defect – Medtec Ambulance Is Recalling Certain Model Year 2007-2009 Ad-170, Fd-160 And Pd-168 Ambulances Equipped With Carrier Airv Ceiling Units, Model Nos. 68Rv0010Ba, 68Rv0012Ca, And 68Rv0010Ea. The Heater Element In These Assemblies May Be DefeCTIve Which Could Cause The Unit To Create Smoke Or Sparks.
Vehicle recall defect – Medtec Ambulance Is Recalling Certain Model Year 2007-2009 Ad-170, Fd-160 And Pd-168 Ambulances Equipped With Carrier Airv Ceiling Units, Model Nos. 68Rv0010Ba, 68Rv0012Ca, And 68Rv0010Ea. The Heater Element In These Assemblies May Be DefeCTIve Which Could Cause The Unit To Create Smoke Or Sparks.
Vehicle recall defect – Medtec Ambulance Is Recalling Certain Model Year 2007-2009 Ad-170, Fd-160 And Pd-168 Ambulances Equipped With Carrier Airv Ceiling Units, Model Nos. 68Rv0010Ba, 68Rv0012Ca, And 68Rv0010Ea. The Heater Element In These Assemblies May Be DefeCTIve Which Could Cause The Unit To Create Smoke Or Sparks.
Vehicle recall defect – Medtec Ambulance Is Recalling Certain Model Year 2007-2009 Ad-170, Fd-160 And Pd-168 Ambulances Equipped With Carrier Airv Ceiling Units, Model Nos. 68Rv0010Ba, 68Rv0012Ca, And 68Rv0010Ea. The Heater Element In These Assemblies May Be DefeCTIve Which Could Cause The Unit To Create Smoke Or Sparks.
Vehicle recall defect – Medtec Is Recalling Certain Model Year 2009-2011 Ambulances (Type I, Type I-Ad, Type Ii, Type Iii, And Type Iii-Ad) Manufactured From January 2, 2009, Through May 1, 2011. If An Attendant Lands On The Bench Top With Great Force, Such As When The Vehicle Hits A Bump In The Road, The Bench Top Screws May Loosen And Pull Out.
Vehicle recall defect – Medtec Is Recalling Certain Model Year 2009-2011 Ambulances (Type I, Type I-Ad, Type Ii, Type Iii, And Type Iii-Ad) Manufactured From January 2, 2009, Through May 1, 2011. If An Attendant Lands On The Bench Top With Great Force, Such As When The Vehicle Hits A Bump In The Road, The Bench Top Screws May Loosen And Pull Out.
Vehicle recall defect – Medtec Is Recalling Certain Model Year 2010 Ambulance Type Ii Vans For Not Complying With Federal Motor Vehicle Safety Standard No. 207, “Seating Systems,” And Federal Motor Vehicle Safety Standard No. 210, “Seat Belt Assembly Anchorages.” The Rear Facing Ambulance Attendant Seat Utilizes A Steel Floor Reinforcement Plate On The Bottom Side Of The Aluminum Floor Substructure And The Reinforcement Plate Was Omitted In Some Ambulance Bodies.
Vehicle recall defect – Medtec Is Recalling Certain Model Year 2007 Through 2010 Ambulances Manufactured From September 14, 2007, Through April 15, 2010. The Rear Facing Ambulance Attendant Seat Was Not Equipped With A Type 2 Seat Belt Assembly, And So The Vehicles Fail To Comform To The Requirements Of Federal Motor Vehicle Safety Standard No. 208, “Occupant Crash ProteCTIon.”
Vehicle recall defect – Medtec Is Recalling Certain Model Year 2007 Through 2010 Ambulances Manufactured From September 14, 2007, Through April 15, 2010. The Rear Facing Ambulance Attendant Seat Was Not Equipped With A Type 2 Seat Belt Assembly, And So The Vehicles Fail To Comform To The Requirements Of Federal Motor Vehicle Safety Standard No. 208, “Occupant Crash ProteCTIon.”