midas

Midas Midas (1985) – 84V128000

Vehicle recall defect – The Fuel Hose May Rub Against A Bracket In The Area Where It Attaches To The Fuel Pump. As The Hose Chafes Against The Bracket, A Leak Can Develop.


Midas Midas (1984) – 84V128000

Vehicle recall defect – The Fuel Hose May Rub Against A Bracket In The Area Where It Attaches To The Fuel Pump. As The Hose Chafes Against The Bracket, A Leak Can Develop.


Midas Midas (1984) – 84V083000

Vehicle recall defect – Auxiliary Fuel Tank Retaining Straps Which Keep Tank In Place May Loosen. The Tank Could Move Or Become Dislodged From Motor Home.


Midas Midas (1983) – 84V083000

Vehicle recall defect – Auxiliary Fuel Tank Retaining Straps Which Keep Tank In Place May Loosen. The Tank Could Move Or Become Dislodged From Motor Home.


Midas Midas (1983) – 83V054000

Vehicle recall defect – Spring Is Not Adequate To Support The Weight Of The Bunk Which Is Installed Above The Driver/Passenger Compartment.


Midas Midas (1977) – 77V118000

Vehicle recall defect – The Spare Tire Mounting Bracket On The Involved Vehicles May Be DefeCTIve And Could Break Under Certain Stress Conditions. The Spare Tire Would Then Be Free To Fall From The Vehicle.


Midas Midas – 89E022000

Vehicle recall defect – The Hub May Separate From The Discs Of The Rotors.


Midas Midas – 88E023000

Vehicle recall defect – Heat Shield Was Installed On Lower Side Of Muffler Instead Of The Upper Side.


Midas Series 2000 (1980) – 80V007000

Vehicle recall defect – Vehicles Are Equipped With An Insufficient Number Of Seat Belts When Compared With The Sleeping Capacity As Advertised In The Brochure. This Fails To Conform To Federal Motor Vehicle Safety Standard No. 210, “Seat Belt Assembly Anchorages”, And 208, “Occupant Crash ProteCTIon”.


Midas Series 2000 (1979) – 80V007000

Vehicle recall defect – Vehicles Are Equipped With An Insufficient Number Of Seat Belts When Compared With The Sleeping Capacity As Advertised In The Brochure. This Fails To Conform To Federal Motor Vehicle Safety Standard No. 210, “Seat Belt Assembly Anchorages”, And 208, “Occupant Crash ProteCTIon”.