new yorker

Vehicle recall defect – Location Of Hydraulic Brake Tube To Both Rear Wheels Causes Interference And Chafing Between The Tubes And Rear Suspension Trailing Arm Pivot Brackets.

Vehicle recall defect – The Automatic Speed Control Switch May Stick In The “Resume” Position RestriCTIng Return Movement. This Will Not Allow The Normal Brake Pedal Operation To DeActivate The System.

Vehicle recall defect – The Automatic Speed Control Switch May Stick In The “Resume” Position RestriCTIng Return Movement. This Will Not Allow The Normal Brake Pedal Operation To DeActivate The System.

Vehicle recall defect – Engine May Lose Power Or Stall Due To Carburetor Flooding. This Is Caused By A Poor Electrical Ground On The Carburetor Fuel Bowl Vent Solenoid. Vehicles May Also Have Driveability Problems While The Engine Is Warming Up In Cold Weather. These Problems Include Engine Missing, SAGS, And Hesitation. This Is Caused By A Sticking Carburetor Oxygen Feedback Solenoid.

Vehicle recall defect – The Involved Vehicles May Have Been Assembled With An Oversized Right Front Wheel Bearing Cup Which Also Prevents The Plant Lubricating Equipment From Cycling To Lubricate Both The Inner And Outer Wheel Bearings. The Resultant Bearing Looseness And/Or The Lack Of Lubrication May Cause Bearing Failure And, Possibly, Wheel Spindle Damage.

Vehicle recall defect –

Vehicle recall defect – Fuel Leakage May Occur In Low Ambient Temperature Operation At ConneCTIons Of An Engine Compartment Fuel Supply Hose To The Pressure Regulator And To The Fuel Rail.

Vehicle recall defect – A Service Replacement Drivers Seat Cushion (Manual Seat Type) May Contain Wrong Cushion With A Brace That Could Interfere With Power Seat Adjuster Mechanism And Cause Stress On The Frame.

Vehicle recall defect – Vehicle Description: Passenger Vehicles Built With 3.5L Engines. The Fuel InjeCTIon Delivery System Can Leak Fuel From Some Of The Sealing O-Rings Or From Hair Line Cracks In The Thermoset Fuel InjeCTIon Rail.

Vehicle recall defect – Battery Cap Vents May Be Partially Or Completely Blocked With Plastic Flashing. Consequence Of Defect: A Build Up Of Internal Gas Pressure Could Occur Which Could Result In Case Rupture, Particularly During Post Charging. Should A Person Be In The Vicinity Of The Battery When The Case Ruptures, They May Be Injured By The Released Gases And/Or Acid.