Vehicle recall defect – The Front Safety Belt Buckle Release Buttons Can Break. These Red Plastic Release Buttons Are Marked “Press.” If A Button Breaks, Pieces Can Fall Into The Buckle Assembly Causing The Buckle To Operate Improperly.
Vehicle recall defect – Moisture Present In The Exhaust Gas Recirculation System May, Under Conditions Of Sub-Zero Temperatures And Low Egr Flow Rate, Condense And Freeze In The Throttle Chamber. An Icing Condition Could Occur If The Vehicle Owner Fails To Adequately Warm Up The Engine Before Driving. This Could Prevent The Throttle From Closing Completely And Would Result In Higher Than Norman Idle Rpm.
Vehicle recall defect – Moisture And Blow Of Mist Present In The Positive Crankcase Ventilation System May, Under Conditions Of Sub-Zero Temperatures, Accumulate In The Air Regulator, Causing Prolonged Engine Idle, If Owner Fails To Fully Warm Engine Before Driving. The Pcv System Can Also Cause A Gumming In The Throttle Shaft Which Will Impair The Smooth Open/Close Operation Of The Throttle.
Vehicle recall defect – Moisture And Blow Of Mist Present In The Positive Crankcase Ventilation System May, Under Conditions Of Sub-Zero Temperatures, Accumulate In The Air Regulator, Causing Prolonged Engine Idle, If Owner Fails To Fully Warm Engine Before Driving. The Pcv System Can Also Cause A Gumming In The Throttle Shaft Which Will Impair The Smooth Open/Close Operation Of The Throttle.
Vehicle recall defect – There Is A Possibility Of Premature Hose Deterioration Due To High Fuel Oxidation Levels Which Would Allow Fuel Seepage And Fumes To Enter The Vehicle.