Vehicle recall defect – In A Vehicle Impact From The Rear, The Three Piece Hoses Could Separate And Result In Fuel Leakage In Excess Of The Amount Permitted By Federal Motor Vehicle Safety Standard No. 301, “Fuel System Integrity”.
Vehicle recall defect – The Intermediate Shaft Coupling On The Involved Vehicles May Have Been Machined Oversized In The Serration Area Where It Attaches To The Steering Column. This Would Prevent The Coupling From Properly Tightening On The Shaft When The Clamp And Pinch Bolt Were Installed.
Vehicle recall defect – The Front Suspension Control Arms Were Assembled With Ball Joints Which May Contain Sockets That Were Not Properly Heat-Treated. This May Cause The Socket To Wear Rapidly And Allow The Ball Joint StUD To Separate From The Socket, Causing Either The Left Or Right Wheel Suspension To Collapse.
Vehicle recall defect – The Front Suspension Control Arms Were Assembled With Ball Joints Which May Contain Sockets That Were Not Properly Heat-Treated. This May Cause The Socket To Wear Rapidly And Allow The Ball Joint StUD To Separate From The Socket, Causing Either The Left Or Right Wheel Suspension To Collapse.
Vehicle recall defect – Tracker Marine Is Recalling 1,161 My 2007 Trailstar K17V, K18V, K21Vhdsa, K21Vta, K23Vta, P27, P30, P32, And My 2008 K17, K18V, K1901, K21Vhdsa, K21Vta, K23Vta, P27, P30, P32, Mk184Sa, And Mk204Ta Galvanized Boat Trailers Using Jacks Made By Shelby Industries (Tracker Part No. 129111, Shelby Part No. 5874A8-24Hgx). These Trailers Are Used With Kenner, Sun Tracker, And Mako Boat Models. The Mounting Hardware For The Trailer Jack, Which Is Used To Elevate The Trailer Tongue During Storage, May Loosen And Allow The Jack Assembly To Disengage From The Trailer.
Vehicle recall defect – Tracker Marine Is Recalling 1,161 My 2007 Trailstar K17V, K18V, K21Vhdsa, K21Vta, K23Vta, P27, P30, P32, And My 2008 K17, K18V, K1901, K21Vhdsa, K21Vta, K23Vta, P27, P30, P32, Mk184Sa, And Mk204Ta Galvanized Boat Trailers Using Jacks Made By Shelby Industries (Tracker Part No. 129111, Shelby Part No. 5874A8-24Hgx). These Trailers Are Used With Kenner, Sun Tracker, And Mako Boat Models. The Mounting Hardware For The Trailer Jack, Which Is Used To Elevate The Trailer Tongue During Storage, May Loosen And Allow The Jack Assembly To Disengage From The Trailer.