r series

Vehicle recall defect – The Steering Arm May Develop Cracks Due To Insufficient Fatigue Life In The Machine Radius Of The Taper At The Steering Knuckle End.

Vehicle recall defect – Spring Seat Can Deform, Which Causes A Decrease In The ClaMPIng Force In The Suspension Assembly. Loss Of ClaMPIng Force May Bring About Axle Misalignment Or Axle Housing Failure.

Vehicle recall defect – The Right Hand Clearance Lamp Is Obscured, From Certain Angles Of Vision, By The In-Line Precleaner Air Cleaner Cap. The Involved Vehicles Fail To Conform To Federal Motor Vehicle Safety Standard No. 108, “Lamps, RefleCTIve Devices, And Associated Equipment”.

Vehicle recall defect – The Prefabricated Pinch Bolt Clamp At The Lower Steering Shaft Lower Yoke May Not Perform Adequately When Tightened To Specifications. The Clamp May Then Deform And Loss Of ClaMPIng Force And Steering Shaft Disengagement May Result.

Vehicle recall defect – The Right Hand Clearance Lamp Is Obscured, From Certain Angles Of Vision, By The In-Line Precleaner Air Cleaner Cap. The Involved Vehicles Fail To Conform To Federal Motor Vehicle Safety Standard No. 108, “Lamps, RefleCTIve Devices, And Associated Equipment”.

Vehicle recall defect – The Prefabricated Pinch Bolt Clamp At The Lower Steering Shaft Lower Yoke May Not Perform Adequately When Tightened To Specifications. The Clamp May Then Deform And Loss Of ClaMPIng Force And Steering Shaft Disengagement May Result.

Vehicle recall defect – The Prefabricated Pinch Bolt Clamp At The Lower Steering Shaft Lower Yoke May Not Perform Adequately When Tightened To Specifications. The Clamp May Then Deform And Loss Of ClaMPIng Force And Steering Shaft Disengagement May Result.

Vehicle recall defect – The Steering Arm May Develop Cracks Due To Insufficient Fatigue Life In The Machine Radius Of The Taper At The Steering Knuckle End.

Vehicle recall defect – The Steering Arm May Develop Cracks Due To Insufficient Fatigue Life In The Machine Radius Of The Taper At The Steering Knuckle End.

Vehicle recall defect – The Steering Arm May Develop Cracks Due To Insufficient Fatigue Life In The Machine Radius Of The Taper At The Steering Knuckle End.