sierra 2500

Vehicle recall defect – Certain Honeywell Fram Racing Brand Hp4 And Hp8 Oil Filters That Were Manufactured From May 25, 2006, Through September 14, 2007, And Sold For Use As Replacement Equipment For Vehicles List Above. The Affected Filters Are Marked With A Date Code A61451 Through A72571 Sequentially. The Date Code And Part Number Appear On The Filter Housing. Fram Racing Hp4 And Hp8 Oil Filters Not Bearing A Date Code In This Range Are Not Affected By This Recall. The Gasket Of The Oil Filter Becomes More Pliable Under High Temperatures And Pressures.

Vehicle recall defect – Certain Federal-Mogul National And Carquest Aftermarket Hub Assemblies, P/N 515058, Sold For Use On 2001-2006 General Motors 1500 And 2500 4Wd Trucks. On The Subject Hub Assemblies, The Abs Sensor Cord Departs From The Hub Assembly At A 90 Degree Angle. As A Result, There Is A Fit Issue With The Brake Rotor Dust Shield Interfering With The Abs Sensor Cord. If The Hub Assembly Is Installed Despite This Interference, The Gap Between The Abs Sensor And The Tone Wheel May Be Altered. This May Weaken The Output Of The Abs Sensor. Diminished Output Could Result In An Unwanted Abs Activation At Low Speeds And Stopping Distance Could Be Affected.

Vehicle recall defect – Certain Replacement Fuel Filters, Fram Brand Name P/N G3727, With Date Codes X52911 Through X60801 Sequentially Or X600141 And A Mexico Country Or Origin Marking On The Fuel Filter Housing Manufactured From October 18, 2005, Through March 21, 2006, Sold For Use On The Vehicles Listed Above And On Certain School Buses. (To See The School Bus Engine Sizes, Click On “Document Search” And Then “Bus Applications”). The Connector On The Fuel Filter Was Not Manufactured To Honeywell’S Specification. As A Result, The O-Ring May Not Seat Correctly On The Fuel Line.

Vehicle recall defect – Certain Fabtech Aftermarket Replacement Pitman Arms, P/Nos. Fts71000 And Fts71001, Installed For Use On Certain 2001-2006 GM C/K 2500 Pick Up Trucks And Sport Utility Vehicles. The Pin Located Inside The Pitman Arm Can Shear Off Due To A Reverse Bending Fatigue Condition, Resulting In A Total Loss Of Steering Control.

Vehicle recall defect – Vehicle Description: Certain Pickup Trucks Equipped With 6.6L Diesel Engines Fail To Comply With Requirements Of Fmvss No. 105, “Hydraulic And Electric Brake Systems.” These Vehicles Have A Brake System Warning Light In The Instrument Cluster That May Not Illuminate When The Brake Fluid Is Low. In Addition, When The Brake Fluid Is Low, The Vehicle May Not Meet The Partial System Requirements Of Fmvss No. 105.

Vehicle recall defect – Certain Federal-Mogul National And Carquest Aftermarket Hub Assemblies, P/N 515058, Sold For Use On 2001-2006 General Motors 1500 And 2500 4Wd Trucks. On The Subject Hub Assemblies, The Abs Sensor Cord Departs From The Hub Assembly At A 90 Degree Angle. As A Result, There Is A Fit Issue With The Brake Rotor Dust Shield Interfering With The Abs Sensor Cord. If The Hub Assembly Is Installed Despite This Interference, The Gap Between The Abs Sensor And The Tone Wheel May Be Altered. This May Weaken The Output Of The Abs Sensor. Diminished Output Could Result In An Unwanted Abs Activation At Low Speeds And Stopping Distance Could Be Affected.

Vehicle recall defect – Certain Replacement Fuel Filters, Fram Brand Name P/N G3727, With Date Codes X52911 Through X60801 Sequentially Or X600141 And A Mexico Country Or Origin Marking On The Fuel Filter Housing Manufactured From October 18, 2005, Through March 21, 2006, Sold For Use On The Vehicles Listed Above And On Certain School Buses. (To See The School Bus Engine Sizes, Click On “Document Search” And Then “Bus Applications”). The Connector On The Fuel Filter Was Not Manufactured To Honeywell’S Specification. As A Result, The O-Ring May Not Seat Correctly On The Fuel Line.

Vehicle recall defect – Certain Fabtech Aftermarket Replacement Pitman Arms, P/Nos. Fts71000 And Fts71001, Installed For Use On Certain 2001-2006 GM C/K 2500 Pick Up Trucks And Sport Utility Vehicles. The Pin Located Inside The Pitman Arm Can Shear Off Due To A Reverse Bending Fatigue Condition, Resulting In A Total Loss Of Steering Control.

Vehicle recall defect – Vehicle Description: Certain Pickup Trucks Equipped With 6.6L Diesel Engines Fail To Comply With Requirements Of Fmvss No. 105, “Hydraulic And Electric Brake Systems.” These Vehicles Have A Brake System Warning Light In The Instrument Cluster That May Not Illuminate When The Brake Fluid Is Low. In Addition, When The Brake Fluid Is Low, The Vehicle May Not Meet The Partial System Requirements Of Fmvss No. 105.

Vehicle recall defect – Vehicle Description: Certain 2-Wheel Drive Pickup Trucks Fail To Comply With Requirements Of Fmvss No. 120, “Tire SeleCTIon And Rims For Motor Vehicles Other Than Passenger Cars.” The Problem Was Caused By A Computer Error That Resulted In The Certification Label Listing Tire Size And Inflation Pressure Information That Differ From The Tire Size And The Inflation Pressure Information For The Tires On The Vehicle. If The Vehicle Owner Or Someone SeRVIcing The Vehicle Inflates The Tires According To The Pressure Specified On The Label Versus The Appropriate Pressure For The Tires, The Tires Could Be Under-Inflated Or Over-Inflated Depending On The Tires Mounted On The Vehicle.