Trailstar Nitro 201 (2004) – 04V212000
Vehicle recall defect – On Certain Single-Axle Boat Trailers, The Wheels May Not Have Been Properly Machined Causing The Wheels To Disengage From The Wheel Hub.
Trailstar Nitro 201 (2003) – 04V212000
Vehicle recall defect – On Certain Single-Axle Boat Trailers, The Wheels May Not Have Been Properly Machined Causing The Wheels To Disengage From The Wheel Hub.
Trailstar Mk204Ta (2008) – 08V133000
Vehicle recall defect – Tracker Marine Is Recalling 1,161 My 2007 Trailstar K17V, K18V, K21Vhdsa, K21Vta, K23Vta, P27, P30, P32, And My 2008 K17, K18V, K1901, K21Vhdsa, K21Vta, K23Vta, P27, P30, P32, Mk184Sa, And Mk204Ta Galvanized Boat Trailers Using Jacks Made By Shelby Industries (Tracker Part No. 129111, Shelby Part No. 5874A8-24Hgx). These Trailers Are Used With Kenner, Sun Tracker, And Mako Boat Models. The Mounting Hardware For The Trailer Jack, Which Is Used To Elevate The Trailer Tongue During Storage, May Loosen And Allow The Jack Assembly To Disengage From The Trailer.
Trailstar P16 (2006) – 06V343000
Vehicle recall defect – Certain Boat Trailers Fail To Conform To The Requirements Of Federal Motor Vehicle Safety Standard No. 110, ‘Tire SeleCTIon And Rims.’ The Original Capacity Tag Displays An Incorrect Weight Capacity For The Trailer.
Trailstar Mk184Sa (2008) – 08V133000
Vehicle recall defect – Tracker Marine Is Recalling 1,161 My 2007 Trailstar K17V, K18V, K21Vhdsa, K21Vta, K23Vta, P27, P30, P32, And My 2008 K17, K18V, K1901, K21Vhdsa, K21Vta, K23Vta, P27, P30, P32, Mk184Sa, And Mk204Ta Galvanized Boat Trailers Using Jacks Made By Shelby Industries (Tracker Part No. 129111, Shelby Part No. 5874A8-24Hgx). These Trailers Are Used With Kenner, Sun Tracker, And Mako Boat Models. The Mounting Hardware For The Trailer Jack, Which Is Used To Elevate The Trailer Tongue During Storage, May Loosen And Allow The Jack Assembly To Disengage From The Trailer.
Trailstar P16 (2005) – 06V343000
Vehicle recall defect – Certain Boat Trailers Fail To Conform To The Requirements Of Federal Motor Vehicle Safety Standard No. 110, ‘Tire SeleCTIon And Rims.’ The Original Capacity Tag Displays An Incorrect Weight Capacity For The Trailer.
Trailstar K23Vta (2008) – 08V133000
Vehicle recall defect – Tracker Marine Is Recalling 1,161 My 2007 Trailstar K17V, K18V, K21Vhdsa, K21Vta, K23Vta, P27, P30, P32, And My 2008 K17, K18V, K1901, K21Vhdsa, K21Vta, K23Vta, P27, P30, P32, Mk184Sa, And Mk204Ta Galvanized Boat Trailers Using Jacks Made By Shelby Industries (Tracker Part No. 129111, Shelby Part No. 5874A8-24Hgx). These Trailers Are Used With Kenner, Sun Tracker, And Mako Boat Models. The Mounting Hardware For The Trailer Jack, Which Is Used To Elevate The Trailer Tongue During Storage, May Loosen And Allow The Jack Assembly To Disengage From The Trailer.
Trailstar Nitro Z9 (2012) – 12V290000
Vehicle recall defect – Tracker Marine Is Recalling Certain Model Year 2012-2013 Trailstar Nitro And Tahoe Boat Trailers, Manufactured From September 28, 2011, Through May 13, 2012. Variance Of A Bracket Welded In The Brake Actuator Shell Prevents The Full Range Of Motion Of The Master Cylinder Shaft Rod. This Can Cause The Brakes To Overheat At The Wheels. Excessive Heat May Lead To Brake Failure And/Or Possible Wheel Bearing Failure.
Trailstar K23Vta (2007) – 08V133000
Vehicle recall defect – Tracker Marine Is Recalling 1,161 My 2007 Trailstar K17V, K18V, K21Vhdsa, K21Vta, K23Vta, P27, P30, P32, And My 2008 K17, K18V, K1901, K21Vhdsa, K21Vta, K23Vta, P27, P30, P32, Mk184Sa, And Mk204Ta Galvanized Boat Trailers Using Jacks Made By Shelby Industries (Tracker Part No. 129111, Shelby Part No. 5874A8-24Hgx). These Trailers Are Used With Kenner, Sun Tracker, And Mako Boat Models. The Mounting Hardware For The Trailer Jack, Which Is Used To Elevate The Trailer Tongue During Storage, May Loosen And Allow The Jack Assembly To Disengage From The Trailer.
Trailstar Nitro Z8 (2012) – 12V290000
Vehicle recall defect – Tracker Marine Is Recalling Certain Model Year 2012-2013 Trailstar Nitro And Tahoe Boat Trailers, Manufactured From September 28, 2011, Through May 13, 2012. Variance Of A Bracket Welded In The Brake Actuator Shell Prevents The Full Range Of Motion Of The Master Cylinder Shaft Rod. This Can Cause The Brakes To Overheat At The Wheels. Excessive Heat May Lead To Brake Failure And/Or Possible Wheel Bearing Failure.