western

Vehicle recall defect – Inadequate Weld Positioning Coupled With Radius Rod Load And Loosening Of The Spring Clip Nuts Could Cause Spring Seat Fracture. This Can Result In Loss Of DireCTIonal Control Of The Axle.

Vehicle recall defect – Due To A Deficiency In Material Strength, The Front Engine Support Brackets On The Involved Vehicles May Develop Cracks That Could Lead To Bracket Failure. This Would Cause The Engine To Drop Down Into The Radiator, Damaging The Shroud, Engine Fan, And Other Associated Parts. The Engine Throttle Could Be Pulled Into Full Governed Position.

Vehicle recall defect – Vehicle Certification Labels Were Mislocated On The Involved Vehicles. The Labels Are Located Inside The Dispatch Box Lid Where They Are Not Easily Visible.

Vehicle recall defect – The Involved Vehicles Fail To Comply With Federal Motor Vehicle Safety Standard No. 204, “Steering Control Rearward Displacement”. The Aluminum Front Spring Rear Bracket Is Subject To Breakage. This Bracket, Along With The Taper Leaf Front Springs, Attaches The Spring Shackle To The Chassis Frame.

Vehicle recall defect – Improper Steering Clamp Bolts And Torque Applied During Installation. The Bolt Could Fail, Allowing The Steering Yoke To Become Loose.

Vehicle recall defect – Improper Steering Clamp Bolts And Torque Applied During Installation. The Bolt Could Fail, Allowing The Steering Yoke To Become Loose.

Vehicle recall defect – Spring Seat Can Deform, Which Causes A Decrease In The ClaMPIng Force In The Suspension Assembly. Loss Of ClaMPIng Force May Bring About Axle Misalignment Or Axle Housing Failure.

Vehicle recall defect – Spring Seat Can Deform, Which Causes A Decrease In The ClaMPIng Force In The Suspension Assembly. Loss Of ClaMPIng Force May Bring About Axle Misalignment Or Axle Housing Failure.

Vehicle recall defect – Inadequate Weld Positioning Coupled With Radius Rod Load And Loosening Of The Spring Clip Nuts Could Cause Spring Seat Fracture. This Can Result In Loss Of DireCTIonal Control Of The Axle.

Vehicle recall defect – Due To A Deficiency In Material Strength, The Front Engine Support Brackets On The Involved Vehicles May Develop Cracks That Could Lead To Bracket Failure. This Would Cause The Engine To Drop Down Into The Radiator, Damaging The Shroud, Engine Fan, And Other Associated Parts. The Engine Throttle Could Be Pulled Into Full Governed Position.