Vehicle recall defect – The Equalizing Beam Shaft Of The Tandem Axle Suspension Were Manufactured From As-Rolled Sae4140 Steel Rather Than The Specified Annealed Sae4140. These Shafts Can Fracture Inside The Beam At The Toe Of The Weld.
Vehicle recall defect – The Machining Performed On The Brake Drums Will Not Permit The DrUM To Seat Fully Against The Hub Face. The Reduced Brake DrUM And Hub Contact Area Will Abrade And Fret Allowing The Wheel Mounting Joint To Loosen.
Vehicle recall defect – The Lp Tank Can Pivot In Its Mounting Bracket And Work Loose.
Vehicle recall defect – Equipment Description: Aftermarket Aluminum Light Truck Wheels, 16″X6″, Used With Dual Rear Wheel Axle Applications. Fatigue Cracks Can Occur At Multiple Locations In The Outboard Bear Seat Area, Allowing Air To Slowly Leak Out Of The Tire. If The User Ignores The Problem, The Cracks Can Continue Around The Circumference Of The Wheel, Causing The Face Of The Wheel To Separate From The Remaining Part Of The Wheel.
Vehicle recall defect – Equipment Description: Aftermarket Aluminum Light Truck Wheels, 16″X6″, Used With Dual Rear Wheel Axle Applications. Fatigue Cracks Can Occur At Multiple Locations In The Outboard Bear Seat Area, Allowing Air To Slowly Leak Out Of The Tire. If The User Ignores The Problem, The Cracks Can Continue Around The Circumference Of The Wheel, Causing The Face Of The Wheel To Separate From The Remaining Part Of The Wheel.
Vehicle recall defect – Certain Motor Homes Equipped With Norcold Refrigerator Cooling Units Model Numbers 462. These Refrigerators Can Experience A Break Down In A Rubber Seal Within The Gas Valve. As The Rubber Seal Ages, A Leak May Occur, Allowing Propane Gas To Accumulate In The Burner Area.
Vehicle recall defect – The Supplemental Inflatable Restraint Caution Label Was Not Placed On The Driver’S Sun Visor. This Does Not Meet The Requirements Of Fmvss No. 208, “Occupant Crash ProteCTIon.”
Vehicle recall defect – The Awnings For The Slide-Out Room Can Unfurl Or Unroll During Transit Causing The Bracket To Rip Free Of The Sidewall Of The Vehicle.
Vehicle recall defect – The Awnings For The Slide-Out Room Can Unfurl Or Unroll During Transit Causing The Bracket To Rip Free Of The Sidewall Of The Vehicle.
Vehicle recall defect – The Awnings For The Slide-Out Room Can Unfurl Or Unroll During Transit Causing The Bracket To Rip Free Of The Sidewall Of The Vehicle.