GMC 2500 (1999) – 04V562000
Vehicle recall defect – On Certain Vans Equipped With Sure-Lok Wheelchair Securement Systems, The Sprocket Teeth Of The Retractor Assembly Is Out Of Alignment.
GMC 2500 (1998) – 04V562000
Vehicle recall defect – On Certain Vans Equipped With Sure-Lok Wheelchair Securement Systems, The Sprocket Teeth Of The Retractor Assembly Is Out Of Alignment.
GMC 2500 (1997) – 04V562000
Vehicle recall defect – On Certain Vans Equipped With Sure-Lok Wheelchair Securement Systems, The Sprocket Teeth Of The Retractor Assembly Is Out Of Alignment.
International Harvester 2500 (1996) – 95V144000
Vehicle recall defect – These Vehicles Were Built With An Improperly Plumbed Brake System Which Affects The Braking On The Rear Axle When Running Either Bobtail Or Pulling A Trailer.
International Harvester 2500 (1995) – 95V144000
Vehicle recall defect – These Vehicles Were Built With An Improperly Plumbed Brake System Which Affects The Braking On The Rear Axle When Running Either Bobtail Or Pulling A Trailer.
International Harvester 2500 (1995) – 95E009002
Vehicle recall defect – During Assembly, The Tie Rod End Nuts Were Not Properly Torqued. Extremely Low Torque Can Allow Movement Beween The Ball StUD And The Tie Rod Arm Causing Damage.
Navistar 2500 (1999) – 99V055001
Vehicle recall defect – Vehicle Description: Heavy Duty Trucks, Transit And School Buses, Equipped With Meritor Air Brake Automatic Slack Adjusters. Some Of The Automatic Slack Adjusters Had Insufficient Torque Applied To The Guide Pawl Cap Screw.
Navistar 2500 (1999) – 99V014002
Vehicle recall defect – Vehicle Description: Class 8 Heavy Duty Truck Chassis Equipped With 16,000 Lb., 18,000 Lb., Or 20,000 Lb. Heavy Duty Steering Axles. The Inner Wheel Bearing Cone For The Steering Axle Wheel Hub Assembly Does Not Properly Fit Onto The Navistar Steering Axle Spindle Assembly. Improper Fit Of The Bearing To The Spindle Increases The Stress Levels To The Steering Axle Spindle Which Could Cause Spindle Failure.
Navistar 2500 (1998) – 99V014002
Vehicle recall defect – Vehicle Description: Class 8 Heavy Duty Truck Chassis Equipped With 16,000 Lb., 18,000 Lb., Or 20,000 Lb. Heavy Duty Steering Axles. The Inner Wheel Bearing Cone For The Steering Axle Wheel Hub Assembly Does Not Properly Fit Onto The Navistar Steering Axle Spindle Assembly. Improper Fit Of The Bearing To The Spindle Increases The Stress Levels To The Steering Axle Spindle Which Could Cause Spindle Failure.
Ram 2500 (2010) – 13V529000
Vehicle recall defect – Chrysler Group Llc (Chrysler) Is Recalling Certain Model Year 2008-2012 Ram 2500 4X4 And 3500 4X4 Trucks, 2008-2012 Dodge Ram 3500 4X2 Cab Chassis, And Model Year 2008 Dodge Ram 1500 Mega Cab 4X4. The Left Tie Rod Assembly May Break.