760

Volvo 760 (1987) – 91V075000

Vehicle recall defect – Safety Belts Are Designed To Be Routed Under A Diagonal Cross Brace During Fastening. The InstruCTIonal Labels For The Belt Routing Are Inadequate, And Can Result In Inadvertent Release Of The Belt Buckle.


Volvo 760 (1986) – 91V075000

Vehicle recall defect – Safety Belts Are Designed To Be Routed Under A Diagonal Cross Brace During Fastening. The InstruCTIonal Labels For The Belt Routing Are Inadequate, And Can Result In Inadvertent Release Of The Belt Buckle.


Volvo 760 (1986) – 86V083000

Vehicle recall defect – The Tailgate Child Lock Can Be Opened From Inside When The Child Lock Is Engaged. The Feature To Prevent The Tailgate From Being Operated From The Inside Of The Station Wagon May Not FunCTIon Properly. Consequence Of Defect: If A Child Is Not Properly Secured In An Approved Restraint System, As Required By Many State Laws, And Is Allowed To Ride In The Rear Compartment, He/She May Open The Tailgate Inadvertently And Fall Out Into The Traffic.


Volvo 760 (1985) – 91V075000

Vehicle recall defect – Safety Belts Are Designed To Be Routed Under A Diagonal Cross Brace During Fastening. The InstruCTIonal Labels For The Belt Routing Are Inadequate, And Can Result In Inadvertent Release Of The Belt Buckle.


Volvo 760 (1985) – 85V002000

Vehicle recall defect – Certain Vehicles Are Equipped With Water Pump Pulleys Which May Contain A Manufacturing Defect, Reducing The Durability Of The Pulley. Consequence Of Defect: If The Pulley Fails, Pieces May Be Thrown About Inside The Engine Compartment And Cause Damage To Engine Components. If The Hood Should Be Opened It Is Possible A Pulley Failure Could Cause Injury To Persons In The Area.


Volvo 760 (1983) – 84V018000

Vehicle recall defect – The Brake Warning Switch May Have Components That Have Been Improperly Manufactured. Brake Fluid May Seep From The Switch Without Triggering The Brake Warning Switch.


Volvo 760 (1990) – 91V075000

Vehicle recall defect – Safety Belts Are Designed To Be Routed Under A Diagonal Cross Brace During Fastening. The InstruCTIonal Labels For The Belt Routing Are Inadequate, And Can Result In Inadvertent Release Of The Belt Buckle.