Vehicle recall defect – Ce Model School Buses Which Fail To Comply To Federal Motor Vehicle Safety Standard No. 221, School Bus Body Joint Strength. The Roof Top Sheet May Be Improperly Located, Reducing The Material Edge Distance At The Rivet Line.
Vehicle recall defect – Certain Flat Floor School Buses Were Built With The Incorrect Hydraulic Brake Drop Hoses From Frame To Axle. The Hoses Installed Were 3 Inches Shorter Than Specified And May Fail From Tension Caused By Axle Articulation.
Vehicle recall defect – Certain School Buses Equipped With Flip Seats Fail To Comply With The Requirements Of Federal Motor Vehicle Safety Standard No. 217, “Bus Emergency Exits And Window Retention And Release.” Seats With Seat Belts Were Bolted To The Floor Without The Use Of Required Reinforcements Under The Floor.
Vehicle recall defect – On Certain School Bus Warning Lamps, A Static Electricity Discharge Can Occur During Normal Services Or Handling. This Discharge Can Potentially Initiate A Chemical ReAction Of Materials Within The Lamp Which Could Cause The Lens To Fracture.
Vehicle recall defect – Certain 1998, 2000-2005 My Ce, Fe, And Re School Buses Built With One Or More CE White 30-Inch Child Restraint Seats And Manufactured Between March 25, 1998 And August 24, 2004. The Seat Cushion Retention May Not Retain The Seat In All CircuMSTances.
Vehicle recall defect – Certain My 2001-2005 Amtran/Ic Corporation Ce, Fe, And Re School Buses Equipped With Sure-Lok Wheelchair Tie-Down Securement Assemblies P/N 8625-13. The Sprocket Teeth Of The Retractor Assembly May Be Out Of Alignment Causing The Load Pawl Not To Fully Seat In The Sprocket Teeth.
Vehicle recall defect – Certain Sure-Lok Wheelchair Tie-Down Securement Assemblies P/N 8625-13 For Use On Certain School And Transit Buses. The Sprocket Teeth Of The Retractor Assembly May Be Out Of Alignment Causing The Load Pawl Not To Fully Seat In The Sprocket Teeth.
Vehicle recall defect – Ce Model School Buses Which Fail To Comply To Federal Motor Vehicle Safety Standard No. 221, School Bus Body Joint Strength. The Roof Top Sheet May Be Improperly Located, Reducing The Material Edge Distance At The Rivet Line.
Vehicle recall defect – Vehicle Description: School Buses Equipped With Flip Seats At The Emergency Exits. The Seat Cushion Hinge On The Combination Flip Seat Is Located In Such A Manner That It Is Within Easy Reach Of The Passenger Sitting In The Seat Located Behind The Combo Flip Seat.
Vehicle recall defect – Certain Flat Floor School Buses Were Built With The Incorrect Hydraulic Brake Drop Hoses From Frame To Axle. The Hoses Installed Were 3 Inches Shorter Than Specified And May Fail From Tension Caused By Axle Articulation.