Vehicle recall defect – Federal-Mogul Is Recalling Certain Replacement Control Arm Assemblies, Part Numbers K7425, 10945, Fa4510X, K7427, 10946, And Fa4611X, Sold For Use On Various Passenger Vehicles Listed Above. The Ball Joint On The Control Arm Assembly Can Fail Causing The Ball StUD To Wear Through The Control Arm Housing Resulting In Noise And/Or Separation Of The Ball StUD From The Housing.
Vehicle recall defect – Qualis Automotive Is Recalling Certain Aftermarket Ball Joints Sold For Use On Certain Passenger Vehicles. The Socket May Have Been Excessively Hardened Which Could Cause It To Crack Near The Retaining Ring Groove Allowing The Ball StUD To Separate Under Impact Load. The Subject Ball Joints Were Sold As Four Part Numbers, D10945, D10946, G10945, And G10946. The Affected Control Arms, D10945 And D10946, Are Stamped With The Following Dates On The Ball Joints: 134308, 135708, 100109, 102709, 104109, 105509, 107609, 108909, 110309, 113209, And 116609. The G10945 And G10946 Are The Same Part As The D10945 And D10946 RespeCTIvely. They Are Labeled Differently Depending On The Aftermarket Customer.
Vehicle recall defect – Certain Airtex Fuel Pump Modules, P/Nos. E7089M, E7094M, E7113M, And E7129M, Manufactured Between June 1 And September 24, 2006. These Fuel Pump Modules Were Sold As Aftermarket For Use In Certain Daimlerchrysler Vehicles Listed Above. Silicone Material Used In Manufacture Of The Flapper Valve Was Out-Of-Specification, Leading To Excess Swell Of The Flapper Valve RestriCTIng The Flow Of Fuel To The Fuel Pump Module.
Vehicle recall defect – Certain Tigas Fuel Pump Modules Manufactured Between June 1 And September 24, 2006, Sold Under Various Brand Names And P/Nos. These Fuel Pump Modules Are Sold As Aftermarket For Use In Certain Daimlerchrysler Vehicles Listed Above. Silicone Material Used In Manufacture Of The Flapper Valve Was Out-Of-Specification, Leading To Excess Swell Of The Flapper Valve RestriCTIng The Flow Of Fuel To The Fuel Pump Module.
Vehicle recall defect – Vehicle Description: Passenger Vehicles. The Affected Vehicles Were Built With Incorrect Child Lock InstruCTIon Labels.
Vehicle recall defect – Vehicle Description: Passenger Vehicles. The Right Rear Brake Tube Can Contact The Exhaust System Clamp And Wear A Hole In It.
Vehicle recall defect – Federal-Mogul Is Recalling Certain Replacement Control Arm Assemblies, Part Numbers K7425, 10945, Fa4510X, K7427, 10946, And Fa4611X, Sold For Use On Various Passenger Vehicles Listed Above. The Ball Joint On The Control Arm Assembly Can Fail Causing The Ball StUD To Wear Through The Control Arm Housing Resulting In Noise And/Or Separation Of The Ball StUD From The Housing.
Vehicle recall defect – Qualis Automotive Is Recalling Certain Aftermarket Ball Joints Sold For Use On Certain Passenger Vehicles. The Socket May Have Been Excessively Hardened Which Could Cause It To Crack Near The Retaining Ring Groove Allowing The Ball StUD To Separate Under Impact Load. The Subject Ball Joints Were Sold As Four Part Numbers, D10945, D10946, G10945, And G10946. The Affected Control Arms, D10945 And D10946, Are Stamped With The Following Dates On The Ball Joints: 134308, 135708, 100109, 102709, 104109, 105509, 107609, 108909, 110309, 113209, And 116609. The G10945 And G10946 Are The Same Part As The D10945 And D10946 RespeCTIvely. They Are Labeled Differently Depending On The Aftermarket Customer.
Vehicle recall defect – Import Products Is Recalling 30,351 Fuel Filters Sold To And Branded By The Affinia Group As Carquest P/N 86523, Napa P/N 3523, And Wix P/N 33523 For Use As Replacement Equipment On The Vehicles Listed Above. These Filters May Develop A Leak In The Hose Assembly And/Or Connectors Due To Improperly Adhered Line Connectors.
Vehicle recall defect – On Certain Passenger Vehicles Equipped With 2.4 Liter Engines, The High Pressure Power Steering Hose May Prematurely Heat Age And Develop A Leak.