durastar

Vehicle recall defect – Navistar Is Recalling Certain Model Year 2012-2013 IC Bus Brand Model 1300Fbc, Ce, Hc, And Re Buses; Model Year 2011-2013 International Brand Model Durastar, Model Year 2013 International Brand Workstar Trucks; Model Year 2013 Holiday Rambler Brand Model Ambassador And Endeavor Vehicles; And Model Year 2013 Monaco Brand Model Diplomat And Knight Vehicles. These Vehicles Were Manufactured August 5, 2010 Through September 6, 2012 And Are Equipped With Certain 2011-2013 Model Year I-6 Engines With Feature Codes 12Nuk, 12Nul, 12Num, 12Nun, 12Nup, 12Nur, 12Nus, 12Nut, 12Nuu, 12Nuv, 12Nux, 12Nuy And 12Nuz. The InjeCTIon Pressure Regulator (Ipr) Harness Wire May Break Due To Vibrational Damage. This Could Cause An Unexpected Shut Down Of The Engine.

Vehicle recall defect – Navistar Is Recall Certain Model Year 2011 And 2012 International Durastar, Paystar, Workstar, Transtar, Lonestar And Prostar Commercial Trucks Manufactured From November 5, 2010, Through March 10, 2011, For Failing To Comply With Federal Motor Vehicle Safety Standard No. 121, “Air Brake Systems (Abs).” The Trailer Abs Fault Indicator Lamp In The Instrument Cluster Will Not Illuminate Due To A Programming Or Hardware Issue With The Brake System Electronic Control Unit.

Vehicle recall defect – Navistar Is Recalling Certain Model Year 2012 International Durastar And Workstar Commercial Trucks, Manufactured From April 26, 2011, Through December 19, 2011, And Equipped With A 7 Degree Passenger Seat (Feature Code 16Jaj Or Scba). During A Load Test, The Front Passenger Seat Separated From Its Mounting Rails. Thus, The Vehicles Failed To Conform To The Requirements Of Federal Motor Vehicle Safety Standard No. 207, “Seating Systems.”

Vehicle recall defect – Navistar Is Recalling Certain Model Year 2013 International 8600, 2012 And 2013 Durastar, 2011-2013 Prostar, And 2012 Workstar Trucks, Manufactured From November 23, 2010, Through April 02, 2012, And Equipped With Piston Spring Brake Feature Code 04Evp. The Piston Bore Area Of The Parking Brake Chamber May Have An Air Leak Could Result In The Parking Brake Not Fully Releasing.

Vehicle recall defect – Navistar Is Recalling Certain Model Year 2012-2013 IC Bus Ce-C, Hc, And International 9400 And Certain Model Year 2011 Through 2013 International Durastar, Paystar, Workstar, Transtar, Lonestar, Prostar, 9200, And 9800, And Certain Model Year 2013 International 9900, Vehicles, Manufactured From December 2, 2010, Through January 26, 2012, And Equipped With Bendix Atr-6 TrAction Relay Valves. In Extremely Cold Conditions, These Bendix Relay Valves May Potentially Develop Internal Leakage. Internal Leakage Can Lead To Air Pressure Being Delivered To Affected Primary Or Secondary Brakes Causing Continuous Brake Application.

Vehicle recall defect – Navistar Is Recalling Certain Model Year 2012 International Durastar And IC Bus Hc Heavy Trucks And Buses Manufactured From February 10, 2011, Through February 18, 2011,That Were Equipped With A Meritor Mfs08 Series Non-Drive Front Steer Axle. During The Assembly Process, The Steering Attachment Bolts May Have Been Insufficiently Torqued.

Vehicle recall defect – Navistar Is Recalling Certain Model Year 2011 And 2012 International Durastar Heavy Trucks Equipped With Engine Feature Code 12Uxj And 12Uxh Manufactured From January 21, 2010, Through April 19, 2011. The Battery Cable Insulation May Abrade On The Front Suspension Spring Shackle, Possibly Resulting In An Electrical Short.

Vehicle recall defect – Navistar Is Recall Certain Model Year 2011 And 2012 International Durastar, Paystar, Workstar, Transtar, Lonestar And Prostar Commercial Trucks Manufactured From November 5, 2010, Through March 10, 2011, For Failing To Comply With Federal Motor Vehicle Safety Standard No. 121, “Air Brake Systems (Abs).” The Trailer Abs Fault Indicator Lamp In The Instrument Cluster Will Not Illuminate Due To A Programming Or Hardware Issue With The Brake System Electronic Control Unit.

Vehicle recall defect – Navistar Is Recall Certain Model Year 2011 And 2012 International Durastar And Workstar Commercial Trucks Manufactured From October 19, 2010, And February 3, 2011, Equipped With Gunite Automatic Slack Adjusters. Due To An Incomplete “Knitting” Of The Iron At The Time Of Casting, Inadequate Structural Integrity Of The Slack Adjuster Housing Can Occur, Which Could Cause The Housing To Break At The Handle Under Normal Operating Loads.

Vehicle recall defect – Navistar, Inc. (Navistar) Is Recalling Certain Model Year 2010-2014 International Durastar Trucks Manufactured May 13, 2009, To June 24, 2013, 2011-2012 International Workstar Trucks Manufactured November 30, 2010, To September 26, 2011, And 2010-2014 IC Bus Hc Transit Buses Manufactured November 19, 2009, To April 24, 2013. The Affected Vehicles May Have An Improperly Routed Engine Grid Heater Power Feed Cable Which Can Result In The Cable ContActing The Metal Edge On The Cab.