Vehicle recall defect – Certain Medium Duty Chassis Cabs Fail To Comply With The Requirements Of Federal Motor Vehicle Safety Standard No. 120, “Tire SeleCTIon And Rims For Motor Vehicles Other Than Passenger Cars.” The Tire Placard Label And Incomplete Vehicle Label May Have Incorrect Metric (Kpa) Tire Pressure Information (Tire Inflation Pressure Shown In English Units (Psi) Is Correct), And Transposed Tire Size And Rim Size Information.
Vehicle recall defect – On Certain Trucks Built With Dana Rear Axles, The Rear Axle May Have A Housing That Was Built Using Steel That Was Thinner Than Specified.
Vehicle recall defect – On Certain Medium Duty Chassis Cab Vehicles Equipped With Hydraulic Brakes, The Drive Line Park Brake Anchor Bolt May Be Susceptible To Fatigue Loading. The Bolt Could Fracture Over Time Due To Insufficient Clamp Load As A Result Of Improper Anchor Bolt Plating.
Vehicle recall defect – On Certain Cab Chassis Vehicles Equipped With Accuride Aluminum Wheels, The Wheels Were Not Properly Pre-Stressed. This Allows Cracks To Develop Over Time.
Vehicle recall defect – Certain Medium Duty Chassis Cabs Fail To Comply To The Requirements Of Federal Motor Vehicle Safety Standard No. 121, “Air Brake Systems.” The Air Brake Lines May Be Misrouted Between The Primary And Secondary Reservoir Tanks Of The Air Brake System.
Vehicle recall defect – Ford Motor Company (Ford) Is Recalling Certain Model Year 2011-2013 And 2015 Ford F-650, And F-750 Trucks Manufactured February 14, 2011, To April 28, 2015, And Equipped With A 70% Fixed Bench Passenger Seat. The Affected Vehicles Have Passenger Seat Belt Anchorage Floor Attachments That Are Not Installed In The Correct Location. As Such, These Vehicles Fail To Comply With The Requirements Of Federal Motor Vehicle Safety Standard (Fmvss) Number 210, “Seat Belt Assembly Anchorages.”
Vehicle recall defect – Ford Motor Company (Ford) Is Recalling Certain Model Year 2011-2013 And 2015 Ford F-650, And F-750 Trucks Manufactured February 14, 2011, To April 28, 2015, And Equipped With A 70% Fixed Bench Passenger Seat. The Affected Vehicles Have Passenger Seat Belt Anchorage Floor Attachments That Are Not Installed In The Correct Location. As Such, These Vehicles Fail To Comply With The Requirements Of Federal Motor Vehicle Safety Standard (Fmvss) Number 210, “Seat Belt Assembly Anchorages.”
Vehicle recall defect – Ford Is Recalling Certain Model Year 2011 F-650 Trucks, Manufactured From February 2, 2011, Through February 17, 2011, And Equipped With A Meritor Mfs08 Front Steer Axle. The Bolts Attaching The Steering Arm To The Steering Knuckle Were Not Properly Tightened. This Condition Can Result In The Steering Arm Loosening Or Separating.
Vehicle recall defect – Ford Is Recalling Certain Model Year 2011 F-650 And F-750 Trucks, Equipped With Air Brakes And A Trailer Package Or Tractor Package, For An Incorrectly Programmed Abs Module. As Such, These Vehicles Fail To Comply With The Requirements Of Federal Motor Vehicle Safety Standard No. 121, “Air Brake Systems (Abs).”
Vehicle recall defect – Ford Is Recalling Model Year 2010 F-650 And F-750 Trucks. The S-Cam Tubes On The Air Brake Axle Assemblies Were Not Greased And Corrosion May Develop Over Time, Which May Restrict Release Of The Service Brake At The Affected Wheel.