Vehicle recall defect – The Mounting Of The Crossmember May Be Insufficient. Crossmembers Are Mounted To A Shim Piece Of Square Tubing And Then This Entire Structure Is Mounted To The Frame. The Small Shim Piece Could Become Detached From The Crossmember Which Would Allow The Body To Move Down Two Inches. This Movement Could Puncture The Fuel Tank.
Vehicle recall defect – The Mounting Of The Crossmember May Be Insufficient. Crossmembers Are Mounted To A Shim Piece Of Square Tubing And Then This Entire Structure Is Mounted To The Frame. The Small Shim Piece Could Become Detached From The Crossmember Which Would Allow The Body To Move Down Two Inches. This Movement Could Puncture The Fuel Tank.
Vehicle recall defect – The Mounting Of The Crossmember May Be Insufficient. Crossmembers Are Mounted To A Shim Piece Of Square Tubing And Then This Entire Structure Is Mounted To The Frame. The Small Shim Piece Could Become Detached From The Crossmember Which Would Allow The Body To Move Down Two Inches. This Movement Could Puncture The Fuel Tank.
Vehicle recall defect – Falcon Is Recalling One Model Year 2012 Gooseneck Trailer Equipped With A Dexter Axle Brand Electric/Hydraulic (E/H) Brake Actuator Pump. This Pump May Not Have Been Properly Heat Treated. This Condition Can Cause Premature Wear Of Some Critical Components In The Pump Which Can Render The Unit Inoperable.
Vehicle recall defect – Silver Eagle Is Recalling Certain Model Year 2010-2011 Hawk, Tandem And Falcon Dollies Manufactured From November 18, 2010, Through March 24, 2011, And Equipped With Gunite Automatic Slack Adjusters. Due To An Incomplete “Knitting” Of The Iron At The Time Of Casting, Inadequate Structural Integrity Of The Slack Adjuster Housing Can Occur, Which Could Cause The Housing To Break At The Handle Under Normal Operating Loads.