Vehicle recall defect – PJ Trailers Is Recalling Certain Model Year 2011 Flatbed Trailers Equipped With A 15 3/4″ Or A 21 3/4″ Equalizer For 10K/12K Spring Axles. The Welds On The Top Of The Equalizer That Hold The Bushing Through Which The Equalizer Bolts To The Trailer Were Not Properly Welded And Can Fail Causing The Axle To Detach From The Trailer.
Vehicle recall defect – During Assembly, The Tie Rod End Nuts Were Not Properly Torqued. Extremely Low Torque Can Allow Movement Between The Ball StUD And The Tie Rod Arm Causing Damage.
Vehicle recall defect – Vehicle Description: Certain Trailers With The Axles Placed So That The Back Of The Tire Is More Than 12 Inches From The Rear Of The Trailer Fail To Comply With The Requirements Of Fmvss 224, “Rear Impact ProteCTIon.” These Trailers Are Equipped With Approved Rear Impact ProteCTIon, But Are Not Properly Labeled. A Label With The Manufacturer’S Name And Address, The Letters Dot, And The Date Manufactured Needs To Be Placed On The Forward Facing Surface Of The Horizontal Guard 12 Inches In From The Right Side.
Vehicle recall defect – Vehicle Description: Certain Trailers With The Axles Placed So That The Back Of The Tire Is More Than 12 Inches From The Rear Of The Trailer Fail To Comply With The Requirements Of Fmvss 224, “Rear Impact ProteCTIon.” These Trailers Are Equipped With Approved Rear Impact ProteCTIon, But Are Not Properly Labeled. A Label With The Manufacturer’S Name And Address, The Letters Dot, And The Date Manufactured Needs To Be Placed On The Forward Facing Surface Of The Horizontal Guard 12 Inches In From The Right Side.
Vehicle recall defect – Vehicle Description: Certain Trailers With The Axles Placed So That The Back Of The Tire Is More Than 12 Inches From The Rear Of The Trailer Fail To Comply With The Requirements Of Fmvss 224, “Rear Impact ProteCTIon.” These Trailers Are Equipped With Approved Rear Impact ProteCTIon, But Are Not Properly Labeled. A Label With The Manufacturer’S Name And Address, The Letters Dot, And The Date Manufactured Needs To Be Placed On The Forward Facing Surface Of The Horizontal Guard 12 Inches In From The Right Side.