Vehicle recall defect – Vehicle Description: School And Transit Buses. Some Certification Labels Displayed The Incorrect Tire Pressure For The Tire Specified To Meet The Gross Axle Weight Rating For The Front And/Or Rear Axles. This Does Not Meet The Certain Requirements Of Fmvss No. 120, “Tire SeleCTIon And Rims For Motor Vehicles Other Than Passenger Cars,” And 49 Cfr Part 567, “Certification.”
Vehicle recall defect – Vehicle Description: School Buses Equipped With Flip Seats At The Emergency Exits. The Seat Cushion Hinge On The Combination Flip Seat Is Located In Such A Manner That It Is Within Easy Reach Of The Passenger Sitting In The Seat Located Behind The Combo Flip Seat.
Vehicle recall defect – Certain Fe School And Commercial Buses Built With CE White Driver Seats With A Pedestal Style Mount And Manufactured Between January 10, 1992 Through February 24, 2004. These Pedestals Can Develop Cracks Rendering The Seat Unstable.
Vehicle recall defect – Certain Fe Model School Buses Manufactured From October 14, 1991, And March 4, 2003. A Gap Between The Modesty Panel And The Wheel Well Located Behind The Driver’S Seat Can Be Created If The Panel Is Bent Out Of Position. Under The Panel, The Edges Are Sharp And Jagged.
Vehicle recall defect – Ce Model School Buses Which Fail To Comply To Federal Motor Vehicle Safety Standard No. 221, School Bus Body Joint Strength. The Roof Top Sheet May Be Improperly Located, Reducing The Material Edge Distance At The Rivet Line.
Vehicle recall defect – Certain Fe School And Commercial Buses Built With CE White Driver Seats With A Pedestal Style Mount And Manufactured Between January 10, 1992 Through February 24, 2004. These Pedestals Can Develop Cracks Rendering The Seat Unstable.
Vehicle recall defect – Certain Fe Model School Buses Manufactured From October 14, 1991, And March 4, 2003. A Gap Between The Modesty Panel And The Wheel Well Located Behind The Driver’S Seat Can Be Created If The Panel Is Bent Out Of Position. Under The Panel, The Edges Are Sharp And Jagged.
Vehicle recall defect – Ce Model School Buses Which Fail To Comply To Federal Motor Vehicle Safety Standard No. 221, School Bus Body Joint Strength. The Roof Top Sheet May Be Improperly Located, Reducing The Material Edge Distance At The Rivet Line.
Vehicle recall defect – Certain Fe School And Commercial Buses Built With CE White Driver Seats With A Pedestal Style Mount And Manufactured Between January 10, 1992 Through February 24, 2004. These Pedestals Can Develop Cracks Rendering The Seat Unstable.
Vehicle recall defect – Certain Fe Model School Buses Manufactured From October 14, 1991, And March 4, 2003. A Gap Between The Modesty Panel And The Wheel Well Located Behind The Driver’S Seat Can Be Created If The Panel Is Bent Out Of Position. Under The Panel, The Edges Are Sharp And Jagged.