fiat

Vehicle recall defect – Vehicles May Be Susceptable To Heavy Rusting In Structurally Significant Areas Of The Undercarriage. This Condition May Impair The Attachment To The Body Of: 1) The Front Upper Control Arms, 2) The Front Cross Member To Which The Front Lower Control Arms Are Attached, 3) The Steering Box And Idler Arm Mounting And 4) The Rear Trailing Arm Which Is Attached To The Internal Cross Member Below The Rear Seat And To The Rear Axle. Undercarriage Corrosion Is Accelerated By Exposure To De-Icing Salts.

Vehicle recall defect –

Vehicle recall defect –

Vehicle recall defect –

Vehicle recall defect – Chrysler Is Recalling Certain Model Year 2012 Dodge Journey And Fiat 500 Vehicles Manufactured From October 24, 2011, Through October 26, 2011. Some Vehicles Were Assembled With Contaminated Brake Fluid And May Experience A Degradation Of The Sealing Components Within The Brake System.

Vehicle recall defect – Dlt, Llc. Is Recalling Certain Cravenspeed Fiat Short Shifter Shafts Sold For Use In 2011-2019 Fiat 500 Vehicles. The Shifter Shaft May Have Been Improperly Manufactured With A Through Hole For The Set Screw Rather Than A Blind Hole, Which May Lead To The Breakage Of The Shifter Shaft.

Vehicle recall defect – The Drive Shaft Front Centering Spline May Experience Excessive Wear Due To Insufficient Lubrication. This Can Result In Transmission Jamming, A Sudden Elimination Of Power And Handling Difficulties. Excessive Wear Could Also Result In Rear Transmission Housing Damage.

Vehicle recall defect – The Drive Shaft Front Centering Spline May Experience Excessive Wear Due To Insufficient Lubrication. This Can Result In Transmission Jamming, A Sudden Elimination Of Power And Handling Difficulties. Excessive Wear Could Also Result In Rear Transmission Housing Damage.

Vehicle recall defect – There May Be Breakage In The Spriral-Shaped Spring Mounted On The Carburetor Throttle Control Lever. This Will Affect The Responsiveness Of The Accelerator Pedal To Driver Pressure And Could Affect Engine Control.

Vehicle recall defect – On The Involved Vehicles, The Rear Rubber Seal Of The Brake Master Cylinder May Prematurely Wear. Abnormal Air Infiltration Into The Hydraulic System Would Result, Causing Self-Bleeding Difficulty. Also, Longer Brake Pedal Travel Would Be Experienced And Could Lead To Partial Or Total Loss Of Action On The Front End Brakes.