Vehicle recall defect – The Involved Vehicles Were Manufactured Using A Standard Type Nut To Fasten The Steering Wheel To The Steering Column. This Nut May Not Have Been Tightened To Specifications And May Back Off The Steering Column As A Result. This Will Allow The Steering Wheel To Disengage From The Column.
Vehicle recall defect – Hendrickson Is Recalling 138 Air Control Kit Assemblies In Lift Axle And Suspension Applications Equipped With Haldex Quick Release Valves (Qrv). Hendrickson Also Sells The Haldex Qrv For Service Purposes Under Part Number Va-1129. The Rubber DiaphraGM Inside The Qrv May Experience Delamination Resulting In Significant Levels Of Air Pressure Leakage Past And/Or Through The Diaphragm, Or The Development Of A Bubble In The DiaphraGM Which May Trap Air Pressure In The Valve. A ReduCTIon Of Pressure In The Lift Axle Ride Air Springs Can Reduce The Lift Axle’S Load Carrying Capacity. In Addition, Any Trapped Air Pressure In The Qrv May Prevent The Ability To Exhaust Lift Axle Ride Air Springs In Order To Raise The Lift Axle. ReduCTIon Of Pressure In The Suspension Air Springs Can Lower The Vehicle Ride Height. In Addition, Any Trapped Air Pressure In The Qrv May Prevent The Ability To Raise And/Or Lower The Air Suspension To The Proper Ride Height.
Vehicle recall defect – The Bolts That Clamp The Mor/Ryde Suspension Beam And Lower Mounting Plate To The Axle May Break As A Result Of Misalignment Of The Bolts Due To Non-Parallel Surfaces Of The Upper Beam Plate And The Lower Bottom Plate. Another Contributing Factor Is The Absence Of Shear Blocks To The Upper Spacer Pad.
Vehicle recall defect – The Bolts That Clamp The Mor/Ryde Suspension Beam And Lower Mounting Plate To The Axle May Break As A Result Of Misalignment Of The Bolts Due To Non-Parallel Surfaces Of The Upper Beam Plate And The Lower Bottom Plate. Another Contributing Factor Is The Absence Of Shear Blocks To The Upper Spacer Pad.
Vehicle recall defect – The Bolts That Clamp The Mor/Ryde Suspension Beam And Lower Mounting Plate To The Axle May Break As A Result Of Misalignment Of The Bolts Due To Non-Parallel Surfaces Of The Upper Beam Plate And The Lower Bottom Plate. Another Contributing Factor Is The Absence Of Shear Blocks To The Upper Spacer Pad.
Vehicle recall defect – The Brake Shoe Welds On The Rear Brake Assemblies Could Fail At The Point Where The Weld Joins The Brake Shoe Table. A Broken Weld Could Result In Loss Of Braking Capability.