knight

Vehicle recall defect – On Certain Motorhomes, The I-Beam Leaf Imitator In The Front Axle Suspension Could Crack And Break Due To An Inadequate Welding Process.

Vehicle recall defect – Vehicle Description: Class A Motor Homes Equipped With Safety Belt Assemblies Built By Am-Safe. On Some Seat Belts, The Buckle And Connector May Unlatch During A Collision.

Vehicle recall defect – On Certain Motor Homes, The Battery Cable That Is Attached To The Circuit Breaker Is Routed Too Close To The Frame Of The Coach.

Vehicle recall defect – Vehicle Description: Motor Homes Equipped With Meritor WABCo Phase 1, D-Version Antilock Brake System (Abs), Fail To Comply To The Requirements Of Fmvss No. 105, “Hydraulic And Electric Brake Systems.” An Internal Diagnostic System In The Abs May Not Detect An Extreme Wheel Speed Sensor Air Gap. Such A Condition Could Possibly Occur During (1) Original Assembly Or (2) Subsequent Wheel End Service.

Vehicle recall defect – On Certain Motor Homes, The Brake Assemblies Exhibit Elevated Temperatures That Can Lead To Catastrophic Deterioration Of The Wheel End Components Such As Bearings, Races, Spindles, Knuckles, Seals, Hubs, Rotors, Patch Bolts, Calipers, Brake Pads, And Abs Sensors.

Vehicle recall defect – Vehicle Description: Motor Homes Equipped With Allison 1000 Or 2400 Series Transmissions. These Transmissions Can Experience Park Pawl To Rear Cover Interference Due To An Out Of Flatness Condition.

Vehicle recall defect – Monaco Is Recalling Certain Motor Homes Equipped With Norcold Refrigerators. A Fatigue Failure In The SeCTIon Of The Cooling Unit Which Contains The Refrigerant Could Allow The Liquid Solution To Slowly Leak.

Vehicle recall defect – On Certain Class A Motor Homes, The Spacer Plate Under The Trailing Arms Had A Transverse Weld Which Creates A Heat Riser And Cause The Trailing Arms To Crack.

Vehicle recall defect – On Certain Motorhomes, The I-Beam Leaf Imitator In The Front Axle Suspension Could Crack And Break Due To An Inadequate Welding Process.

Vehicle recall defect – On Certain Motor Homes, The Brake Assemblies Exhibit Elevated Temperatures That Can Lead To Catastrophic Deterioration Of The Wheel End Components Such As Bearings, Races, Spindles, Knuckles, Seals, Hubs, Rotors, Patch Bolts, Calipers, Brake Pads, And Abs Sensors.